Codes P2302/P0113 Ignition Coil Secondary Circuit/Misfire Cylinder 1

I just replaced my spark plugs while changing the oil cooler, and I am getting these codes. I am going to pull the upper intake back off to diagnose. Where is cylinder 1 physically on the Pentastar? Driver side or passenger? Front or rear? I can't find it by googling.

Any suggestions on what to check? Just swap coil positions?

Thanks!

I found this:

Cylinders are numbered front to rear; the right bank has pistons 1, 3, and 5, the left 2, 4, and 6, with a 1-2-3-4-5-6 firing order. The serial number is on the left side of the block, at the*transmission flange.

Here: https://www.pentastars.com/engines/tech.php

Sent from my SM-G965U1 using WAYALIFE mobile app

Thanks I finally found that too. It was a loose connection on the coil.
Its good to know the order.