2013 jeep wiring help

Dave_g

New member
Ok then I have this question and maybe some one can help me, Eddie I know you run the Off Road Engineering VCM. I was planning on having My rock light buttons be programmed with this Logic

Turn on Rock Lights when Ignition switch input I-2 is on
AND when Switch S7;S8 is activated
OR when the Dome light is Illuminated from unlocking/opening door.
The question would be if I patched into the Yellow/white "Dome supervision" would turning my dome light on manually turn on my rock lights?
I would also like to have any lights I put facing backwards to go on with my reverse lights.
I found this some where on the internet for a 2012 was wondering if this was true:

AutoLights*****N/A**********
Reverse Light*****white/lt. green*****+*****driver kick or TIPM, brown plug, pin 15
Left Front Door Trigger*****purple*****-*****driver kick or TIPM, black plug (C7), pin 11
Right Front Door Trigger*****purple/white*****-*****driver kick or TIPM, black plug (C7), pin 12
Left Rear Door Trigger*****purple/gray*****-*****driver kick or TIPM, black plug (C7), pin 16
Right Rear Door Trigger*****purple/yellow*****-*****driver kick or TIPM, black plug (C7), pin 14
Dome Supervision*****yellow/white*****+*****driver kick or instrument cluster, black plug, pin 7

Any help would be greatly appreciated!
 
Last edited:
Top Bottom