PDA

View Full Version : Help-EVO Double D long arm upgrade



Jkzinger
04-28-2013, 01:54 AM
We are in the middle of installing the EVO Double D long arm upgrade and the front driver side bracket is in the way of the driver side catalytic converter. The exhaust won't go back on with the bracket installed. Did I get the wrong bracket? There is nothing in the instructions that I received that addresses this issue! They just said remove the exhaust and install bracket.

This is on a 2010 JKU Rubicon. Currently in pieces at my buddies house!

Any help would be appreciated!

piginajeep
04-28-2013, 04:37 AM
Your going to need to cut the cat off and rotate it. Then reweld it

Nothing wrong with the bracket, 2010 has a slight exhaust change

paychex.308
04-28-2013, 04:40 AM
is that a difficult mod or a simple cut of some weldz and a rotate?


andrew -

piginajeep
04-28-2013, 05:07 AM
is that a difficult mod or a simple cut of some weldz and a rotate?


andrew -

If your a competent welder it's easy.

paychex.308
04-28-2013, 05:09 AM
kewl... that is good info for something that i plan on doing...

andrew -

RodCyn
04-28-2013, 05:24 AM
Although this is a Teraflex Long Arm installation (part 5of7), it shows the modification of the Cat

http://youtu.be/O0cMyBhgO4I

Jkzinger
04-28-2013, 03:14 PM
Thanks so much for the info and the video link guys!
:beer::thumb: