Help-EVO Double D long arm upgrade

Jkzinger

Caught the Bug

• Apr 28, 2013

• #1

We are in the middle of installing the EVO Double D long arm upgrade and the front driver side bracket is in the way of the driver side catalytic converter. The exhaust won't go back on with the bracket installed. Did I get the wrong bracket? There is nothing in the instructions that I received that addresses this issue! They just said remove the exhaust and install bracket.

This is on a 2010 JKU Rubicon. Currently in pieces at my buddies house!

Any help would be appreciated!

 

piginajeep

The Original Smartass

• Apr 28, 2013

• #2

Your going to need to cut the cat off and rotate it. Then reweld it

Nothing wrong with the bracket, 2010 has a slight exhaust change

 

P

paychex.308

-

• Apr 28, 2013

• #3

is that a difficult mod or a simple cut of some weldz and a rotate?


andrew -

 

piginajeep

The Original Smartass

• Apr 28, 2013

• #4

paychex.308 said:

is that a difficult mod or a simple cut of some weldz and a rotate?


andrew -

Click to expand...

If your a competent welder it's easy.

 

P

paychex.308

-

• Apr 28, 2013

• #5

kewl... that is good info for something that i plan on doing...

andrew -

 

RodCyn

Member

• Apr 28, 2013

• #6

Although this is a Teraflex Long Arm installation (part 5of7), it shows the modification of the Cat

http://youtu.be/O0cMyBhgO4I

 

Jkzinger

Caught the Bug

• Apr 28, 2013

• #7

Thanks so much for the info and the video link guys!
:beer::thumb: