bumpy_baldwin's latest activity

JLU w/ 3.5” lift and has synergy mfg tie rod, drag link, steering stabilizer bracket (for fox ATS 2.0), and sector shaft brace (that...

I’ll do this before buying the tool. Fingers crossed for sure

Same thought myself! I saw a tool that pressure tests and fills. So I’m gonna pressure test to make sure I don’t have a small leak...

To be honest, that’s next on my list if burping the coolant doesn’t work.

It’s a 2019 with 53k. Is coolant part of the powertrain? Never had coolant issues before on any vehicle under 150k miles

Air really shouldn't be able to get in, especially on a newer Jeep. I'm just going off of the symptoms.

Could be a sticking mechanical thermostat (in addition to other's ideas).

Before you do that, you might want to try running your engine till it gets warm with the reservoir cap off.

Kk thank you! I’ll grab a coolant air bleeder tool and test it out. Shops want to flush the coolant, which I don’t want

Overheating and a heater blowing cool or cold air is typically a sign that you have air in the system. Could be a blockage of some kind...

We’ve started to experience our JLU overheating in stop and go traffic. Sometimes when just parked idling as well. Coolant levels are...