desertrunner's latest activity

The only other thing I've read to do that i haven't tried yet is below from another random FB group. I feel hesitant to try that and...

The best way i can describe it from today's drive is the first half is pretty much no effort. Then it starts to pick up some firmness...

E brake doesn't hold for shit. But I also haven't tried to adjust it yet, I've been working on the actual brakes first. I also have...

Forgot the picture my B, there definitely should be enough space in there but the weights were stacked so.... Idk I also drove it up to...

Yeah I figured with the dual piston and larger rotor that they aren't going to feel like stock. But I did expect them to feel similar...

Mine do look at little bigger than that. Not sure if they changed rotor sizes or not. I also went 72" axles and went with 17" wheels...

Dont you have to immediately bleed the calipers after doing that?

Rancho through another 4 rounds of the JScan ABS bleed. Im at the mercy of how long my wife will sit and hold the pedal for me. I didn't...

Ok update on the brakes situation. So I dug around online for ABS bleeding that was better than "using a scan tool" and I found a post...

Can't say i really looked at the weights until they were ripped off but it was only the fronts that hit the calipers. The rears clear...

72" on the axles and 4.25" on the wheels. its about 3" wider than it was before so not too wide but im sitting about 85" total width

There is one other thing I haven't tried yet that a few people have said was the ticket to get them firm on the Facebook page. They will...

Im not sure if fusion mount and balance their own wheel sets, or if they are out sourced. Totally understand every wheel and axle combo...

Ok so this is where I'm at. "Bench blead" the master cylinder Ran the ABS bleed again And blead at the calipers again. The pedal is...

So I tried just opening the front left and pumping the pedal, burned though a bottle of fluid to see no bubbles and no change in the...