Recent content by porter

The install shop sent the driveshaft out to be narrowed and this is what I got back. It seems well balanced.

It looks like this Dana Spicer 1310 driveshaft is too long to me but I'm not a mechanic. There is no compression left in the expansion joint and this pic is taken at ride height. I have a 4" lift and this driveshaft was sold as the right size for a 2 to 4" lift. I could not find a contact line...

Should the brake line have more slack than that? If I had more slack I could use something like a brake line anchor. https://teraflex.com/shop_items/5907c63656d70ed493a14551

When out greasing ball joints I noticed the brake lines were too close to the tire. I took it to the shop that put on the lift and now the brake lines rub on the shock in a way that to my non-mechanic eye looks unsafe. So I ask those with more experience than me, is it safe for brake lines to...

So I am in the market for an aftermarket D44 to replace my stock D30. I have a 4" lift, drag link flip, running 35s but might run 37s in the future, and need to correct my caster & pinion angle due to drive line vibe and a bit of wandering. This JKU is not a daily driver. Looking at the...