Received my HD links today from Northridge 4x4. No instructions. Could find nothing on evo website either. Mounting them in rear.
Do the links mount outboard or inboard? Appears to mount best outboard but I worry they may rub tire. Inboard looks as if they may hit frame or brake lines...
It appears no relocation brackets fit the stock ss that I could find. I'm leaning toward the synergy relo bracket but it is half inch stud. Stock ss won't fit.
Anybody successfully relocate their stock ss and if so how? Is it necessary or beneficial to do so?
So why inspecting my front end steering components, I noticed my stock trackbar seems to move slightly left and right when wheel is turned. Maybe a 1/4 inch as if the rubber bushing is twisting or compressing.
Is this normal? I have rechecked torque to 125 ft pounds and the movement is...
I have found my front drag link joint on the knuckle is popping and loose when I checked it. Time to replace. However here is my issue.
I have a Mopar 2 inch lift (new fox kit that came in the box with drive shaft included).
The actual measured lift is about 3 inches increase over stock...
It has been gusty here and I have noticed sudden gusts seem to push the jeep around a lot.
is this normal jeep behavior at highway speeds?
I have 2 inch lift. 35s. Adjustable lowers with 4.5 degrees caster.
will dialing in 6 degrees caster help the jeep resist wind gusts?
Curious if all...
2014 JKU with 28k miles. 35 BFG KM2s on stock 17s. 26PSI. Tire pressure monitor turned off.
After class tonight went out to Jeep to head home.
When turning left out of parking lot I noticed something felt odd in steering. Almost like one tire was aired way down or like I had 4wd...
Just noticed my rear axle mounted track bar bracket has a lower hole and upper hole I could have bolted my trackbar into. Each hole is one inch apart. My trackbar is bolted into the lower hole and gives my rear trackbar an angled slope. If I move it to the top hole it nearly levels out my...
Can't seem to find info in pdf from eaton nor a Google search. So hopefully someone running the Eaton elock can help me out.
1. To engage locker I must be in either 4 lo or 4 hi correct? Or is it only to be engaged while in 4 lo?
I know the manual said to only engage it at speeds less than...
So I picked this up today from dealer. Nice crate. Can't wait to see what's inside.
I'll post pics and details as I proceed with install if anyone is curious.
Not installing cam bolts. Going for new rancho or aev drop brackets if needed to correct caster.
Anyone else on here running...
I hadn't really flexed it out at all and a friend took me over to a loading ramp to flex our rigs out.
Mine is bone stock with rubicon suspension, 2014 jku willys edition. I was really suprised how much flex these stock jeeps have. Note how the back 32 inch bfg km is making slight contact...
I need help as I'm confused which way to proceed to get my 35 bfgs to.fit with minimal lift.
I have narrowed it down to three options:
1) level kit, chopped fenders, 2 inch.rear bump stops.
2) bumpstops in the 2.5 tf budget boost with rancho 9000 or
3) 2.5 budget boost with my stock...
Got my trail shovel mounted to my maximus tire carrier today. I didnt like how.the shovel originally mounted high against the hilift jack so I set out to mount it behind spare tire on the tire carrier. (See pics below)
Items required:
_Used both maximus shovel mounts included with tire...
Is there a benefit to ditch 32s for 33s when my time comes to get new tires?
I understand 32s are really 31s and 33s really measure 32 something, but I am trying to understand if there is an off-road benefit to gaining 1/2 inch more axle lift upsizing to 33s.
Seems a lot of folks do it...