1988 Jeep YJ build

RamP

RamP

Member
74BA2E83-7B03-4CA0-AFBB-A26D3679433D.jpg
BB90CB51-ACE5-46A5-82CB-ED75210A1119.jpg
E7657B22-61CB-4C97-BE97-0CD20EAEBED2.jpg

Getting super close to firing this Jeep up. So many changes from the initial build idea. I’ll put together a comprehensive build post once it’s all done.
 
RamP

RamP

Member
Here’s some more pics. 30415E00-2088-4C2D-961C-86D0278B4E89.jpg
Springs were out boarded 1.5” to clear the axles. Skid plate is UHMV composite that a lot of the buggy guys use. It bends before it breaks but at 1” thick is super strong.
One ton tie rod ends round out the steering. The tires are 35’s. May go to hydro assist when I step up to 37’s.
AE911AB4-8C6B-4F28-98A1-917E4D0BEF54.jpg
92DC2E57-6642-42E6-AF3F-C02F1E2EB1FE.jpg
 

Attachments

  • 4AFC29E6-7A31-49C3-90E5-4D06B3C9C8F9.jpg
    4AFC29E6-7A31-49C3-90E5-4D06B3C9C8F9.jpg
    107.1 KB · Views: 48
Last edited:
wjtstudios

wjtstudios

Hooked
It’s really interesting seeing the different approaches between the different Jeep models to get the most out of them. Can’t wait to see what can do


2015 JKUR AEV JK350
1985 CJ8 Scrambler
 
RamP

RamP

Member
wjtstudios said:
It’s really interesting seeing the different approaches between the different Jeep models to get the most out of them. Can’t wait to see what can do


2015 JKUR AEV JK350
1985 CJ8 Scrambler
Click to expand...

Thanks everyone. The build has gone lots of ways. From spring over to reverse shackles. In the end the spring under design will be stable as hell and the flat fenders will allow for up t a 37” tire while keeping the Jeep relatively low. With only a 3” suspension lift and 1” body lift.
 
wjtstudios

wjtstudios

Hooked
RamP said:
Thanks everyone. The build has gone lots of ways. From spring over to reverse shackles. In the end the spring under design will be stable as hell and the flat fenders will allow for up t a 37” tire while keeping the Jeep relatively low. With only a 3” suspension lift and 1” body lift.
Click to expand...

After a bunch of research, I’ve gone for a shackle reversal on my scrambler build. It’ll be interesting to see how she climbs and handles.


2015 JKUR AEV JK350
1985 CJ8 Scrambler
 
bmkrinne

bmkrinne

Active Member
This is really cool to see the frame off build. Thanks for posting up your pics! Keep me coming!!! [emoji106]


Sent from my iPhone using WAYALIFE
 
RamP

RamP

Member
wjtstudios said:
After a bunch of research, I’ve gone for a shackle reversal on my scrambler build. It’ll be interesting to see how she climbs and handles.


2015 JKUR AEV JK350
1985 CJ8 Scrambler
Click to expand...

Yeah we really considered it. Coming from a 2013 Rubicon to an 88 with leafs the idea of better ride quality was tempting. The wheelbase of the scrambler is awesome. We stretched the YJ 4” from stock for a bit more goodness.
 
Last edited:
RamP

RamP

Member
A lot of progress going down on the YJ project. Finally back in CT. The motor is mounted. Frame and body are rust free. Only left to do is literally everything else. Axles need to be centered, pinion angle set and perches welded in. I’ve got to build the steering, install fuel and brake lines, all the wiring and figure out where to put the gas can.


Sent from my iPhone using Tapatalk
 
wjtstudios

wjtstudios

Hooked
I love the looks of Jeeps with out the roll bar! To bad it’s not practical to keep them that way!

Your Jeep looks great! Slot of progress!


2015 JKUR AEV JK350
1985 CJ8 Scrambler
 
You must log in or register to reply here.
Top Bottom