Search results

Well my Alignment fixed everything. Drives like it should now. Besides my JKS Swaybar bushings are worn out. My Toe was way off. Chewed the crap out of my front tires in the short amount of time.

It was on the Jeep when I bought it. I've had the Jeep since Oct... Problems only started after swapping axles..

Ya I meant Caster not Camber. I measured my Wheelbase on each side. My Drivers side is 1/2in Longer. Passenger 117-1/4in Drivers 117-3/4in

So my Rubicon axles came from a 2015 and my old axle was a 2011 Dana 30. This picture is how my Rubicon LCA mount is. On the D30 the that slot you can see was open to make it adjustable. I have Camber in it. I adjusted my Toe today and made a quick drive around the block and it seemed better...

No their not adjustable.

New track bar is in. Everything is centered up now. Just have to get it aligned now. On my old axles LCA mounts. They had a Slot and my new ones don't have that adjustments. So I ether make a slot or get adjustable LCAs. Or I guess Geometry Drop Brackets. Not sure which is the Best way. It's a...

Got it back on the road good till my Alignment appointment on Tuesday. Traction Control goes nuts on hard right turns, bc my Toe is off. So I just turned my TC off. I may need to get front adjustable LCAs. I noticed on my old axles LCA mount. They had a Slot and the new Rubicon's just have a...

Ok I got the Jeep Back and swapped Track bars. I checked the angles and they are on with in a degree or 2 of each other. track bar and drag link. Took it for a test drive and did better. Still needs an alignment. My Toe is off. My Traction control light was still going nuts, but only on hard...

I did torque everything myself. I haven't had a chance to drive it myself thou. The shop specializes in JK Jeeps.

I bought the Jeep already lifted. I don't think it has a drop pitman arm. It looks factory.

No you read it right.

I Flipped the draglink and raised the track bar.

These are the only ones I have right now. It hasn't had an alignment yet either. I also noticed when swapping the axles. My 2011 Dana 20 had square Slots on the lower control arm mounts, but the 2015 Rubicon axle just had a hole.

Jeep was at the Shop over the weekend. Just swapped out axles. But I added a Rough Country Front Track Bar bracket, Right hand drive tierod. Drilled and sleeves the knuckle. No steering Stabilizer yet. Havent swapped it over yet. The front Track bar I have is a RE one, but its to long. It...

Solid build platfom

Axles are in. Rear made a little noise when off the gas. So back to the shop to check out the new gears. My RE Track bar is adjustable, but is still too long. I need one that fits stock height. Still need to repaint all the Purple to Red. Other then that and wiring the Lockers up. Its ready for...

New Motobilt rockers installed. Finally tested the flex of it. Not impressed. Guessing I need longer shocks.

Whats going on here?

Works for me. Shoot me a PM the cost of shipping and how to pay you.

What do you want for the best out of the 4 you got? Shipped to 65721