Search results

Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app

I just test drove one, i was looking at tbe Xterra, h3 and the Jeep. I just rode passenger while a salesguy took us to the overflow lot. That was it i was sold, i bought a 2012 sport,15 months later traded it in for a 13 JKUR, got a great deal on it. Needless to say, its all i think about...

I'm from Sacramento, I go wheelin with buddies all the time always looking for more. Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app

What if you have a RK drag link? And if I wanted to get an upgraded box that was plug and play would this be it? I'm running Nitto TGS 37s. Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app

Here's some updated shots. Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app

Went and got this from the dealer, problem solved, thanks guys. Sent from my SAMSUNG-SM-G920A using WAYALIFE mobile app

On my Auto climate control it either blows hot or lukewarm. If I have it on auto all the way across the board in order to get it hot I have to max it out all other settings are lukewarm. Sometimes no matter what setting its full blown hot, unless its all the way cold. Its crazy, Ive disconnected...

In the same boat, gonna get a Milwaukee brushless 1/2 gun, kinda overkill because I'm not a mechanic but in contrast with other brands, price and reviews I think it's the best deal. Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app

So, I went to install this plate today and found out it just basically mounts over the stock one. As you can see , by the pic, it's bent out of shape and needs to be straightened out a little before install of the EVO skid. I'm gonna have to disconnect those lines, is it difficult and how do you...

I'm running the RK 3.5" Xfactor on my JKUR, mid arm. Is it worth it to do the long arm upgrade on this, staying at 3.5" lift? What would be the benefits? I'm either going to do this or get new front/rear coils as I believe my have been over compressed because the shop who did the lift did not...

Here's a pic that might help Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app

I want it to wheel good and look good, I can have both right?😊 Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app

I currently run a 3.5 inch RK Xfactor with Nitto TGS 37 (35.5) @29 psi. I'm debating the above because I want more clearance but I like my handling too, the great dilemma. I figure it's either new axle shafts front and back with 40" Goodyear MTR which net about 2" overall lift or just go long...

I got hung up on a tree and when I pulled away, it tore up my cb cable and the bracket. What I wanna do is get a 9 ft cb cable, flat mount by firestik and use it to extend the CB cable and repair it. What fitting would I use? It's rg58. I'm having a hard time figuring this out, basically wanna...

I'm running Adams DS front and rear,3.5" RK Xfactor, and a rock hard belly pan. Currently have exhaust spacers on and it causes the exhaust to hit belly pan even with spacer kit. Can I remove those spacers to bring exhaust back up with aftermarket drives shafts or maybe re route exhaust behind...

Well I swapped out my bump stops from 3" to 4" and put in new uppers. The uppers are very stiff and not sure if I'm gonna keep them on....maybe they will break in but I don't think they will. Here a couple pics. What's the concensus on Energy upper bumps? Sent from my SAMSUNG-SM-G930A using...

What it looks like with 3" bumps. Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app

I'm having bump stop issues up front, RK Xfactor 3.5" 37" Nitto TGs and Fox reservoir long travel shocks. Shocks are bottoming out. I'm running game stock uppers and 3" lowers. My question is would Kings work here as I would be able to adjust them. My other question is if I go 4" on the bottom...

Mine. Sent from my SAMSUNG-SM-G930A using WAYALIFE mobile app

On the advice from a forum member, thanks , I ordered the DQC exhaust in separate pieces as the kit is back ordered and not available. It came out great, sounds good and is quiet and wasn't too hard to install. Had one cut at pipe going over axle and that's it. Here's a couple pics... Sent from...