Search results

So I was dicking around in my fuse box and apparently broke loose the positive post in the fusebox, and when I try to tighten the nut, the whole bolt spins. This isn't a HUGE issue for now, because the car still runs, but the connection isn't tight so I can imagine I'm going to have issues down...

From most of my research it seems the consensus is that you don't *need* a stabilizer at all if your alignment is dialed in, and some say that the stock one is fine for most cases. However, I replaced the stock one a while back with a shitty dual stabilizer thinking it would fix my problem, but...

Hey all, 2011 JK I had to replace my front ujoints and now I'm leaking diff oil out of the drivers side axle. Did I mess something up, or are my seals done?

Nothing exciting but I changed out the axle u-joints. Mine were 10 years old, broken, and basically fused to the shafts. I had to bring them to a hop to get the u-joints pressed out, nothing I did worked. But they're in!

Put a table on it.

Hey guys, I'm trying to order a pair of axleshaft u-joints for the stock D30 but I'm getting so confused about the different sizes. Do I want a 1310, 5-760X, something else? I have no clue.

Hey guys, Pulled my transmission because I've had a rattle for a few years. Thought it was the TOB so decided to do the clutch as well. Got the bellhousing off a few minutes ago, and I'm hoping someone could tell me if this play and sound in my input shaft is normal or if the whole thing is...

It's this guy. I guess I can just grab a grade 8 bolt and nut that fits and throw it in there, just wasn't sure if someone had a "go to" bolt that fits best (for clearance, etc).

Hey guys. Just pulled my exhaust today so I can drop the transmission. The exhaust bolts at the manifold were a pain in the ass and I want to replace them with something better. The one I'm talking about is the one with the square nut up at the manifold. Any recommendations for replacement?

I can replace the clutch/TOB without too much headache, but replacing an input shaft is new to me so I'd rather not just for "peace of mind". At idle in neutral it makes this sound. If I hit the gas it gets louder/faster. If I put some pressure on the clutch pedal it goes away. I'm thinking...

Painted the tire carrier. Ignore the brackets...I still have to resolve some issues before paint.

Painted my tire carrier. Turned out alright; not perfect, but alright. Couple more things to paint after I get some things sorted out.

Tire carrier!

Got my tire carrier today. It looked good so I threw it on. Tried everything that I can, but I can only get three of the four johnny joints lined up on the mounts. The fourth one is off by about a 3/4"...don't think there's anything I can adjust to get it to line up unless someone knows...

Clutch is making some pretty fantastic sounds. Current clutch is an OEM replacement from a couple years ago, less than 15,000km on this clutch. I ordered a centerforce throwout/release bearing, and I'm probably gonna order a new Luk Clutch Kit (01-046) since I'll be in there anyway. Just...

Where do you guys get your decals for the hood (on the side, where you'd have Rubicon or something similar). Looking to replace mine and don't know of some recommended places to order from.