robx251
Caught the Bug
Looking my jeep over I have found and some play in my pass rear wheel bearing. Replaced it with a new one did not replace the plate with the bolts but did looked it over real good. Cleaned up the rust double checked to make sure pressed on all the way replaced the bearing cup with one that came with it. Re assembled have about 1/16 inch of play in and out with about the same up and down. Same as before replacement. This is significantly less than the driver side. Had a tech from work double check and he is baffled too. Definitely open to suggestions. Even took the plate with the bolts off flattened it a bit in the press. Still got the play. HELP!
Sent from my DROID RAZR HD using WAYALIFE mobile app
Sent from my DROID RAZR HD using WAYALIFE mobile app