Aftermarket seats

Ah2014jk

New member

• Dec 25, 2014

• #1

Wondering if anything needs to be done when adding mastercraft seats to a 2014 JK. ( other than brackets ). I just don't want any lights to go off on the dash lol

 

jeeeep

Hooked

• Dec 25, 2014

• #2

you'll probably have to deal with the airbag connector. I think there's a write-up on how to move the part of the stock belt required for the airbag.

this should help:
http://project-jk.com/jeep-jk-write...-seats-jeep-jk-wrangler-installation-write-up

 

Last edited: Dec 25, 2014

Ah2014jk

New member

• Dec 25, 2014

• #3

jeeeep said:

you'll probably have to deal with the airbag connector. I think there's a write-up on how to move the part of the stock belt required for the airbag.

Click to expand...

Thanks I'll search for that

 

crippledpetey

-

• Dec 25, 2014

• #4

Ah2014jk said:

Wondering if anything needs to be done when adding mastercraft seats to a 2014 JK. ( other than brackets ). I just don't want any lights to go off on the dash lol

Click to expand...

You'll have more than that write up includes (in regards to electrical). If your jeeps has side airbags you will have that light until you either plug it all in or figure out a resistor the completes the loop. I have the MC Rubicon's in mine with harnesses and my airbag light is on. I was told by a couple wiring guys to be careful with trying to mimic the airbag sensor you could set them off. I've just lived with it for now. My goal this spring is to fix it.

 

Ah2014jk

New member

• Dec 25, 2014

• #5

I just have the stripped down sport so no side airs. That's what has been keepin me away from seats is the wiring. Maybe just a set of trek armours