Dynomax evolution on 2door problem

BrandonDetrick

New member

• Nov 10, 2012

• #1

The bracket that connects to the cross member does not fit onto any place the makes sense ? It won't line up to where the the exhaust tip is. Anybody have any advice or pictures to help me out ! Please

 

BONDSY

Member

• Nov 10, 2012

• #2

Here is a complete write-up with install pics.

http://wayalife.com/showthread.php?...petition-Exhaust-System-Installation-Write-Up

 

Rusty

New member

• Nov 10, 2012

• #3

Do you mean the bracket that goes to the EVAP skid plate (where the drop should be on a 4 door) wont line up? than you didn't cut the 2" on the longer pipe like the instructions say

Hope this helps

 

BrandonDetrick

New member

• Nov 10, 2012

• #4

Oh hell. Thanks man ! That makes sense

 

wayoflife

Administrator

Staff member

• Nov 11, 2012

• #5

BONDSY said:

Here is a complete write-up with install pics.

http://wayalife.com/showthread.php?1644-DynoMax-2012-Up-JK-Evolution-Competition-Exhaust-System-Installation-Write-Up

Click to expand...

LOL!! I was just about to post that up

 

BrandonDetrick

New member

• Nov 15, 2012

• #6

wayoflife said:

LOL!! I was just about to post that up

Click to expand...

I still can't figure out where the bracket bolts up at on the two door

 

12CrushJK

New member

• Nov 17, 2012

• #7

You might just have to fab something up. I called DynoMax because I seen where it states that this system is only for the four door. I wanted to know if it would work or if they were releasing a model for the 2-doors and the guy I spoke with said "no" on both questions. He said it dumped out at the axle on the 2-door and it wouldn't work. I really want this exhaust for mine but haven't ordered yet to see if it would work because of what he told me. Could you cut the mid pipe down some to get this bracket in the right spot?