Rock krawler clunk

Ah2014jk

New member

• May 4, 2015

• #1

Any fix for the quick disconnect clunk fron Rock krawler quick connects ( other than go buy JKS )

 

noroad

New member

• May 4, 2015

• #2

what is clunking on them?

 

tastethebeast

Member

• May 4, 2015

• #3

Yes, I had the same issue. 1st make sure they are torqued. Your clunk is most likely coming from the bottom of the links. There will be a little play because of the cotter pin. Go purchase some thin rubber washers from Home Depot and cut them to fit your lower disconnect bolt. You will need 2 rubber washers, 1 for each disconnect. I also spray some WD40 on both ends every couple weeks just to keep everything lubricated.

 

Ah2014jk

New member

• May 5, 2015

• #4

Thanks I'll try this and see what happens

 

toxicwaste29

New member

• May 5, 2015

• #5

Mine are the same way and torqued to spec. There I believe were rubber washers that came with them from rk but they don't seem to do anything

 

tastethebeast

Member

• May 5, 2015

• #6

They come with those white Nylon washers but you need something softer with more give to prevent the clunk.

 

TwistedJK

New member

• May 5, 2015

• #7

Just did this last night and it took care of the problem for me too. Thanks guys!