EVO rear corner skins install

bkac

Caught the Bug
So I did a lot of searching and never really came up with exactly how to install these skins I heard they were really difficult and I'm just going to share my experience for someone that might be interested the install is actually really easy. I chose not to prefit my skins and drop them off at the powder coat shop since this is my wife's daily driver. I ended up having great luck with these.
 

Attachments

  • 1433013546217.jpg
    1433013546217.jpg
    72.8 KB · Views: 602
  • 1433013562141.jpg
    1433013562141.jpg
    43.6 KB · Views: 619
  • 1433013576366.jpg
    1433013576366.jpg
    29.1 KB · Views: 602
  • 1433013588595.jpg
    1433013588595.jpg
    30.7 KB · Views: 606
  • 1433013601537.jpg
    1433013601537.jpg
    42.7 KB · Views: 602
  • 1433013616364.jpg
    1433013616364.jpg
    42.4 KB · Views: 601
  • 1433013631080.jpg
    1433013631080.jpg
    45.2 KB · Views: 602
  • 1433013643865.jpg
    1433013643865.jpg
    20.7 KB · Views: 596
  • 1433013655806.jpg
    1433013655806.jpg
    48.8 KB · Views: 602
  • 1433013667646.jpg
    1433013667646.jpg
    39.6 KB · Views: 599
  • 1433013681103.jpg
    1433013681103.jpg
    27.5 KB · Views: 599
  • 1433013700154.jpg
    1433013700154.jpg
    36.4 KB · Views: 597
  • 1433013709756.jpg
    1433013709756.jpg
    42.8 KB · Views: 598
  • 1433013723721.jpg
    1433013723721.jpg
    20.1 KB · Views: 596
  • 1433013735025.jpg
    1433013735025.jpg
    43.2 KB · Views: 593
  • 1433013747520.jpg
    1433013747520.jpg
    44.3 KB · Views: 598
  • 1433013760225.jpg
    1433013760225.jpg
    24.3 KB · Views: 598
  • 1433013769704.jpg
    1433013769704.jpg
    32.9 KB · Views: 598
  • 1433013782165.jpg
    1433013782165.jpg
    33.5 KB · Views: 595
  • 1433013792095.jpg
    1433013792095.jpg
    38.4 KB · Views: 595

LetsGoMuddin

New member
Just wondering, are you going to use anything to seal the top of the skin so that water doesn't go in between the skin and the body? Digging the white powder coat btw:thumb:
 

JKRicky

Member
Thanks for posting this up. I'll be installing these soon myself and was also thinking of just getting them powder coated prior to test fitting. Looks good.
 

bkac

Caught the Bug
Second part, just finished installing the corner.

This literally took me right at an hour to do the entire corner. now I just have to attach the gas cap wiring the lights and I'm done.
Hope this helps.
 

Attachments

  • 1433016217646.jpg
    1433016217646.jpg
    21.7 KB · Views: 548
  • 1433016229269.jpg
    1433016229269.jpg
    41 KB · Views: 588
  • 1433016239233.jpg
    1433016239233.jpg
    30.2 KB · Views: 547
  • 1433016251185.jpg
    1433016251185.jpg
    38.4 KB · Views: 554
  • 1433016266664.jpg
    1433016266664.jpg
    34.3 KB · Views: 583
  • 1433016279446.jpg
    1433016279446.jpg
    27.4 KB · Views: 542
  • 1433016293015.jpg
    1433016293015.jpg
    35.8 KB · Views: 583
  • 1433016303027.jpg
    1433016303027.jpg
    31 KB · Views: 543
  • 1433016312407.jpg
    1433016312407.jpg
    32.4 KB · Views: 545
  • 1433016322198.jpg
    1433016322198.jpg
    22.3 KB · Views: 550
  • 1433016336417.jpg
    1433016336417.jpg
    42.2 KB · Views: 549
  • 1433016345485.jpg
    1433016345485.jpg
    27.3 KB · Views: 548
  • 1433016358117.jpg
    1433016358117.jpg
    28.3 KB · Views: 589
  • 1433016366986.jpg
    1433016366986.jpg
    35.3 KB · Views: 549

bkac

Caught the Bug
Just wondering, are you going to use anything to seal the top of the skin so that water doesn't go in between the skin and the body? Digging the white powder coat btw:thumb:

Yes I am going to seal around the sides and across the top but I'm going to wait until I install my tire carrier in the next week or so because I'm going to pull the skin back off to fold the pinch seem inside.
 

bkac

Caught the Bug
And finished!
 

Attachments

  • 1433017999012.jpg
    1433017999012.jpg
    50 KB · Views: 438
  • 1433018009411.jpg
    1433018009411.jpg
    31.9 KB · Views: 436
  • 1433018020682.jpg
    1433018020682.jpg
    38.3 KB · Views: 471
  • 1433018030833.jpg
    1433018030833.jpg
    50.2 KB · Views: 437

RMC2

Caught the Bug
I love the white skins.

I think it will look good with the black tire carrier brackets.
 
Top Bottom