13_gecko_rubi
Caught the Bug
I am doing a bunch of upgrades this winter and am considering stepping up to 60s front and rear. Anyone interested in a set of 1 year old ProRocks?
Front - PR44 Ultimate / Extreme
- Purchased and installed last July
- I'm guessing 15k miles max. I don't remember the mileage when I installed it.
- Increased pinion angle seperation / 0.5" tubes
- 4.88 gearing
- 35 Spline ARB locker
- 35 Spline RCVs
- Reid Racing Knuckles
- Synergy Ball Joints
- EVO High Steer TB bracket for PR44 (I can include the drag link also so you have high steer)
- Stock yolk (already had aftermarket shaft on before axles, I can include the driveshaft also. Tatton 1310)
- New unit bearings were installed when I swapped in axle
- Complete including brakes. New brakes were installed 6 months ago roughly. Havent put hardly any mileage on them, no longer my DD.
Rear PR60 Semi Float
- Purchased and installed last July
- 4.88 gearing
- 35 spline ARB
- EVO Rockstar skids for PR60
- EVO raised TB bracket for PR60
- Complete including brakes. New brakes were installed 6 months ago roughly. Havent put hardly any mileage on them, no longer my DD.
I may be forgetting some things. Ask anything you want.
I have run these with my coilovers but all spring perches etc were left on. Both right in to JK. I have used them so obviously there are some scratches, dings and some scuffs on the diff covers.
I really do not want to deal with shipping but am not totally against it. Would be easier to meet part way. I would be willing to go quite a ways to meet, will be in PA for Christmas time. The axles are still under my Jeep at moment.
$8000 OBO
Front - PR44 Ultimate / Extreme
- Purchased and installed last July
- I'm guessing 15k miles max. I don't remember the mileage when I installed it.
- Increased pinion angle seperation / 0.5" tubes
- 4.88 gearing
- 35 Spline ARB locker
- 35 Spline RCVs
- Reid Racing Knuckles
- Synergy Ball Joints
- EVO High Steer TB bracket for PR44 (I can include the drag link also so you have high steer)
- Stock yolk (already had aftermarket shaft on before axles, I can include the driveshaft also. Tatton 1310)
- New unit bearings were installed when I swapped in axle
- Complete including brakes. New brakes were installed 6 months ago roughly. Havent put hardly any mileage on them, no longer my DD.
Rear PR60 Semi Float
- Purchased and installed last July
- 4.88 gearing
- 35 spline ARB
- EVO Rockstar skids for PR60
- EVO raised TB bracket for PR60
- Complete including brakes. New brakes were installed 6 months ago roughly. Havent put hardly any mileage on them, no longer my DD.
I may be forgetting some things. Ask anything you want.
I have run these with my coilovers but all spring perches etc were left on. Both right in to JK. I have used them so obviously there are some scratches, dings and some scuffs on the diff covers.
I really do not want to deal with shipping but am not totally against it. Would be easier to meet part way. I would be willing to go quite a ways to meet, will be in PA for Christmas time. The axles are still under my Jeep at moment.
$8000 OBO
Last edited:
