Mango Tango

spwfz6

spwfz6

New member
I've been off Wayalife for awhile because of a move but I finally found some time to get back to JK family. This build started a couple years ago so I thought I'd post some pictures to get caught up to the present. I'll try to keep up with new pictures as Mango continues to evolve!

To get caught up to the present here are some things that have been done.

Evo 1/4 pounder front bumper
Evo Facia read bumper
Evo tire carrier
Evo HD endlinks front rear
Smittybilt fenders
Mastercraft baja seats
BDS 3in lift
XD 17" strike wheels
35" Falkens

And Wayalife stickers[emoji106]

I hope I didn't leave anything out. .

Coming soon will be some Evo bolt on Kings and a dynomax exhaust.
1479109019975.jpg

1479109394540.jpg 1479109401408.jpg 1479109421772.jpg 1479109427473.jpg 1479109434933.jpg 1479109441873.jpg 1479109447463.jpg 1479109454514.jpg

Here's phase 1, I need to go dig up some more pictures for phase 2.

Sent from my SAMSUNG-SM-N900A using WAYALIFE mobile app
 
spwfz6

spwfz6

New member
Phase 3 pinch seams cutting, Evo mfg tire carrier install. Also threw on the Evo 1/4 front bumper and rear facia around the same time. 1479112743201.jpg 1479112759676.jpg 1479112808979.jpg Sorry for the blurry pics my phone camera was on its last leg around that time.

1479112502699.jpg 1479112516266.jpg 1479112527871.jpg 1479112547344.jpg 1479112566124.jpg 1479112576649.jpg 1479112585069.jpg 1479112648739.jpg

Sent from my SAMSUNG-SM-N900A using WAYALIFE mobile app
 
spwfz6

spwfz6

New member
Phase 4 ....Some times it's better to let someone else paint your rig. I could only find one picure to show what was kind of going on. Basically, the paint was slowly coming off and the black became gray. I was naive and didn't realize at the time that I probably could've taken the skins off and had everything powder coated.

I ended up just having a shop by the house to some custom line-x on the whole thing. I wasn't ever really a fan of the line-x look but I think it turned out pretty clean. There is a way I can get the line-x off if I wanna powder coat it later on down the road, so there's that
. 1479114062236.jpg 1479114080753.jpg 1479114109638.jpg 1479114114106.jpg 1479114122283.jpg 1479114128550.jpg

At some point after the line-x Mango got some mastercraft seats with a couple stickers. The Evo HD endlinks should be on there as well but I don't think you can see them in any of the pictures.

Sent from my SAMSUNG-SM-N900A using WAYALIFE mobile app
 
spwfz6

spwfz6

New member
Here's the picture of the corners right before the line-x. I thought I had attached it in the previous comment but apparently I forgot.
1479114332518.jpg

Sent from my SAMSUNG-SM-N900A using WAYALIFE mobile app
 
spwfz6

spwfz6

New member
1479114411724.jpg goin up 1479114452557.jpg 1479114482291.jpg 1479114487199.jpg With a good wash this afternoon and a new wayalife sticker slabbed on the front windshield, Mango is starting to look better than ever and with some more time and more money - bigger and better upgrades will come.

Thanks for looking!

Sent from my SAMSUNG-SM-N900A using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom