Motor mount help!

B

Bigbadjeeper

New member

• Jun 8, 2017

• #1

So I started installing the Brown Dog mounts today and got the driver side one on no problem. Went to do the passenger side and noticed the mount looked jammed in there and sideways. Took it off and my new mount won't line up with the holes on the body, looks like the engine needs pulled forward about half an inch. Any advice?

Sent from my SM-G920V using WAYALIFE mobile app

 

WJCO

Meme King

• Jun 8, 2017

• #2

Put a board and a floor jack under the engine oil pan and carefully manipulate it until you get the bolt to line up.

 

B

Bigbadjeeper

New member

• Jun 8, 2017

• #3

Will loosening the transmission mount help?

Sent from my SM-G920V using WAYALIFE mobile app

 

B

Bigbadjeeper

New member

• Jun 8, 2017

• #4

WJCO said:

Put a board and a floor jack under the engine oil pan and carefully manipulate it until you get the bolt to line up.

Click to expand...

Will loosening the transmission mount help?

Sent from my SM-G920V using WAYALIFE mobile app

 

PT1400

New member

• Jun 8, 2017

• #5

Loosen but don't remove the nuts.