What do you think I should change or upgrade?

supercell

New member
Here's my jeep. 33 ko2s. 2.5 tf lift with another .5 - .75ish lift from spacers. 1310 fds. bunch o' other small stuff.
https://i.imgur.com/5AnquCf.jpg
Here's a little album of some adventures.
https://imgur.com/a/dumcj

Think my end goal would be just to sleeve and gusset the dana 30, put in a rear locker, regear, put some 35s on, get a winch, tire carrier, and rear bumper.

I wheel it in moab, montezuma, grand junction, and rangely mostly, and go camping once in a while.
 
Last edited:

notnalc68

That dude from Mississippi
Here's my jeep. 33 ko2s. 2.5 tf lift with another .5 - .75ish lift from spacers. 1310 fds. bunch o' other small stuff.
https://i.imgur.com/5AnquCf.jpg
Here's a little album of some adventures.
https://imgur.com/a/dumcj

Think my end goal would be just to sleeve and gusset the dana 30, put in a rear locker, regear, put some 35s on, get a winch, tire carrier, and rear bumper.

I wheel it in moab, montezuma, grand junction, and rangely mostly, and go camping once in a while.

That sounds like an excellent plan.


Sent from my iPhone using WAYALIFE mobile app
 

jeeeep

Hooked
Here's my jeep. 33 ko2s. 2.5 tf lift with another .5 - .75ish lift from spacers. 1310 fds. bunch o' other small stuff.
https://i.imgur.com/5AnquCf.jpg
Here's a little album of some adventures.
https://imgur.com/a/dumcj

Think my end goal would be just to sleeve and gusset the dana 30, put in a rear locker, regear, put some 35s on, get a winch, tire carrier, and rear bumper.

I wheel it in moab, montezuma, grand junction, and rangely mostly, and go camping once in a while.

save money on the sleeves - if the axle breaks it'll still break around the sleeve, the sleeve won't save it.

gusset the C's, rear locker, regear (no lower than 4.88, 5.13 R&P get too small) and the rest of what you have will get you what you need.

Save money up for the eventual D44 or Dynatrac PR44 :thumb:
 

notnalc68

That dude from Mississippi
save money on the sleeves - if the axle breaks it'll still break around the sleeve, the sleeve won't save it.

gusset the C's, rear locker, regear (no lower than 4.88, 5.13 R&P get too small) and the rest of what you have will get you what you need.

Save money up for the eventual D44 or Dynatrac PR44 :thumb:

Damn. I missed the sleeve part, but Jeeeep is right about that.


Sent from my iPhone using WAYALIFE mobile app
 

supercell

New member
Okay then, so buy some nice c gussets, 5.13 and dont worry about a truss or sleeves? The rear D44 is fine as is, ya?
 

jeffj

Caught the Bug
Okay then, so buy some nice c gussets, 5.13 and dont worry about a truss or sleeves? The rear D44 is fine as is, ya?

That's what I would do. Try to spend as little as possible on your d30 and save it for a pro rock.
 
Last edited:

Clutch

Caught the Bug
Man, 5.13 may be too low for 35s. I'd probably go with 4.88.

And just to be clear, gearing shouldn't affect which driveshaft you go with. I think tire size has the biggest effect.


Sent from my iPhone using WAYALIFE mobile app
 

supercell

New member
Man, 5.13 may be too low for 35s. I'd probably go with 4.88.

And just to be clear, gearing shouldn't affect which driveshaft you go with. I think tire size has the biggest effect.

I already have a 1310. Yep, tire size is correct. Maybe I'll do 4.88 then. I also want a rubicrawler so a final crawl ratio of 102 or107 isnt any different.
 
Last edited:
Top Bottom