Hey Rancho, looking for some Part Numbers, I'm replacing my shocks...

jorgelrod

Hooked
So The shocks on my ProComp 2.5" lift have served me well but two of them are on the outs so I want to replace the shocks. I'm looking at the RS5000X, My lift is a 2.5 but I measured it on the weekend and I'm sitting at 3.5" on one side and 3" on the other (will be putting a 0.5 inch spacer to level it). What is the correct Shocks PN that I need so I can order them.

Thanks in advance for the help.
 

Wethy

Member
If Rancho doesnt answer you can measure your extended and collapsed lengths by flexing your jeep and use their website to matxg lengths. My guess is something around the 25-26 extended length would be your max shock size.

For you my guess is the rs55329 up front and the rs55330 out back would be the safe choices.


Sent from my SM-G930W8 using WAYALIFE mobile app
 

jorgelrod

Hooked
If Rancho doesnt answer you can measure your extended and collapsed lengths by flexing your jeep and use their website to matxg lengths. My guess is something around the 25-26 extended length would be your max shock size.

For you my guess is the rs55329 up front and the rs55330 out back would be the safe choices.


Sent from my SM-G930W8 using WAYALIFE mobile app

Thanks for this!!!
 
Top Bottom