The Slow Build of Sprocket

ProtocolJK

Member
I decided it's about time to finally start a build thread. I already have a few mods done and I have many more planned but like many on here, this will be a slow build. My '12 JKUR came with the following options.

Auto trans
Uconnect 730N Navigation w/ connectivity group
A/C with Auto Temp Control
Dual top group
Remote Start
heated leather seats

This is what my rig looked like the day I got it.
IMG_0122.JPG

IMG_0123.JPG

IMG_0124.JPG

IMG_0125.JPG

It didn't take long before I got it dirty.
IMG_0120.JPG

Shortly after the first trip out I ordered a 2.5" Teroflex budget boost (I know,Iknow) :doh: and a pair of 1.5" Spidertrax wheel spacers. I don't have any pics of the lift install but I do have an after pic.
089.jpg
IMG_0117.JPG

After the lift I did a few small mods here and there:

IMG_0119.JPG
I followed Eddie's writeup and installed a maglite

314.jpg
and finally an Evo protek oil pan skid.

After a month or two I bit the bullet and picked up a set of trucklites and what a difference they made!
IMG_0118.JPG

6903.jpg
I also installed a windshield banner.

After saving up for a while I picked up the 3" Evo Enforcer lift and drag link flip. I also upgraded to a set of 35" trail grapplers at the same time.
137.jpg

Out with the old.
4758.jpg

And in with the new!
6641.jpg

2379.jpg

679.jpg

885.jpg

4862.jpg
 
Last winter I picked up an Evo pro series front bumper and Warn M8000S winch.
IMG_0115.jpg

IMG_0112.jpg

IMG_0126.jpg

All painted and ready to be installed.
IMG_0307.jpg

IMG_0309.jpg

IMG_0308.jpg

During the install.
IMG_0339.jpg

IMG_0340.jpg

IMG_0341.jpg

And finally all installed.
IMG_0344.jpg

IMG_0345.jpg

IMG_0348.jpg

I recently picked up an Evo pro series rear bumper but have yet to get it installed.
IMG_1403.jpg

IMG_1404.jpg

and I added a few new stickers.
IMG_0572.jpg

IMG_0573.jpg

Currently this is how Sprocket sits. I will update this thread as I get more done. :thumb:
 
Top Bottom