Looking to see if anyone has installed the Currie Antirock and Poison Spyder BFH II Bumper.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
BFH II and Antirock
- Thread starter QRFJK11
- Start date
Owen19
New member
I'm using a genright stinger and had to notch it a little bit so the antirock wouldn't hit. If the BFH is right at the frame rails, I think you can get away without cutting anything.
But it's just steel, if you want something to fit, nothing a good cut off/grinding wheel can't do.
Sent from my SM-G955U using WAYALIFE mobile app
But it's just steel, if you want something to fit, nothing a good cut off/grinding wheel can't do.
Sent from my SM-G955U using WAYALIFE mobile app
Looking at the instructions for the Antirock it looks like this won’t be an issue. It looks like I will need to install the mounts over the brackets for the BFH II and at the most cut off the outside surface as shown in the installation video.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
DirtysJK
New member
I think you should be fine I have the BFH and antirock
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app