Exodus Jeeps 7075 XD Tie Rods

[Exodus Jeeps]

The day has finally arrived, sort of. Our tie rods are here and ready to order. At the time of this post however we are already very low on inventory due to pre-orders being filled, but material for a new batch is on the way. Click on the link below and you can see the differences between the 2 being offered. Also, we will be offering custom 7075 steering linkages for those of you with 1 ton setups running heim joints. These will be drilled and form tapped for 7/8-14 heim joints since that seems to be the norm, but can probably accommodate those with 5/8 heims upon request.

For those of you with a PR60 and NOT running and high steer conversion, we can also build you a replacement that will have offset GM 1 ton tie rod ends. We have built some in the past with regular non-offset and feel that the offsets to work a little better. If you’re interested send us an email and we can talk about it.

Yes, drag links are in the works.

https://exodusjeeps.com/exodus-jeeps...minum-tie-rod/






Sent from my iPhone using WAYALIFE mobile app

[Sharkey]

Looking good.

[NastyNate]

That's Awesome
So reaming of the knuckle is required to run these TRE's?

[Clutch]

I’m using a tie rod with the GM ton TREs with the stock knuckles and I did not need to ream out the knuckle, seated just fine.


Sent from my iPhone using WAYALIFE mobile app

[Ddays]

Looking forward to seeing this one!

[MericaMade]

Nice looking product!

[Exodus Jeeps]

Looking forward to seeing this one!

I’m going to have to build you a new clamps tomorrow...

The little one might not go out until Wednesday. Big one left today though


Sent from my iPhone using WAYALIFE mobile app

[Exodus Jeeps]

I’m using a tie rod with the GM ton TREs with the stock knuckles and I did not need to ream out the knuckle, seated just fine.


Sent from my iPhone using WAYALIFE mobile app

Interesting. I’ve never installed one in the shop that didn’t require a little reaming.


Sent from my iPhone using WAYALIFE mobile app

[Jsouder53]

Looks great! Maybe I’ll just have to add that to the list for when I get a pr44/60 set from you!

[Clutch]

Interesting. I’ve never installed one in the shop that didn’t require a little reaming.


Sent from my iPhone using WAYALIFE mobile app

Maybe I screwed up? But it seemed to torque down and seat just fine.


Sent from my iPhone using WAYALIFE mobile app