P0688 - error codes

rubiconrunner

rubiconrunner

New member
What’s up wayalifers. Anyone else deal with this intermittent code? My jku doesn’t always have starting issues but intermittently it will take 2-3 attempts at cranking over. So on each attempt, everything lights up, and starts to crank, it will get stuck on cranking for 5-10 seconds... then stop. I will have to repeat that 2-3 times before it cranks over.... battery is excellent both charge and under load. Battery is 3 years old (optima red top)


Sent from my iPhone using WAYALIFE mobile app
 
rubiconrunner

rubiconrunner

New member
IMG_3717.JPG

So this is what’s coming up now. Jeep turned on today, idled for about 5 min then shut right off..... would not crank over on the next attempt... just sat there and cranked but no start. On the following one, turned on. Drove for about 3 minutes, just died on me. Same deal with the starting... anything from anyone??


Sent from my iPhone using WAYALIFE mobile app
 
BaddestCross

BaddestCross

Active Member
Have you actually had your battery load tested on a good machine? Also, have you made sure your terminals are clean and tight... As in removing them, cleaning with a wire brush, tapping them down onto the terminals with a large socket and tightening so there's no play?

--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
 
BaddestCross

BaddestCross

Active Member
rubiconrunner said:
Battery hasn’t been load tested on a good machine... but terminals are sparkling clean and were tapped down and tight.


Sent from my iPhone using WAYALIFE mobile app
Click to expand...
Then having the battery tested would be the first thing I did to be 100% sure all the cells are good and the cranking amps are where they should be. Any auto parts store should be able to do it for free.

--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
 
You must log in or register to reply here.
Top Bottom