PSC JK cylinder mount bracket

BTkillerr

Member
I just got the big bore steering box with ram assist for my 2012 jku. A big thank you to Tim at the PSC truck at Moab this year. I run the Reid racing knuckles so my tie rod is higher than stock. The rod end tabs impinge on the tie rod so I can’t install the bracket provided. Can you recommend another bracket that might allow me to have the tabs welded on at the correct height or do you have a bracket, minus the tabs, that will allow them to be welded at the correct height? The current bracket is about 2-3 inches too short in height.
Thx!
 
Top Bottom