Nothing but problems with dynatrac 60s

[Mybadjk]

I’d be interested to know more about this. I’m not sure what you mean by “tie rod end center point on the driver’s side.” Would you mind explaining this a bit more, for those of use that have the ram connected to the tie rod and not the knuckle (as with the EVO high steer, for example). Thanks.


Sent from my iPhone using WAYALIFE mobile app

I think they might be referring the the ram mount on the tie rod actually being centered on the tie rod.




Sent from my iPhone using WAYALIFE mobile app

[Mybadjk]

IMG_1606.jpg

Received the shaft from dynatrac, painted it with Top coat paint. Still have yet to install it do to the weather being crappy. Snow and rain the past week and a half.

IMG_1611.jpg

Did notice the shafts don’t have full circle clips on them. So probably going to end up tacking the caps.


Sent from my iPhone using WAYALIFE mobile app

[WJCO]

Did notice the shafts don’t have full circle clips on them. So probably going to end up tacking the caps.

I got the same Dynatrac shafts from Foote for my PR44 and they did have full circle clips. Strange.