Results 1 to 4 of 4

Thread: Need help deciding which front uppers to get

  1. #1
    Been Around the Block Braxtonsag's Avatar
    Join Date
    Jan 2018
    Location
    Central Indiana
    Posts
    272

    Need help deciding which front uppers to get

    Right now I have RK front lowers and donít mind them, Iv had them almost 2 years and theyíve given me no issues. I donít maintain them like I should either. Hell Iv only greased them a few of times. Anyways, I need to buy some adjustable front uppers so I can move my axle forward. My pinion angle is too low and with my prorock Iím running slightly excessive caster. My tires are also running at full lock in the rear so need adjustables ASAP.

    Iíd like to go with something not extremely high maintenance, but I also donít really want to ďupgradeĒ yet keep utilizing a solid rubber bushing.

    Right now my main choices are core 4x4 and Rock Krawler. The rock krawlers I can get slightly cheaper but the cores use a Johnny joint. The only thing that confuses me about core is on their website they have tier 2, 3, and 4 front uppers and Iím assuming they just used generic descriptions because it says they come with double JJ or one flex joint and one JJ. Being that the front uppers only have one joint I just donít know what Iím actually buying. Iv tried messaging them with no luck.

  2. #2
    Nothing but a Thing nbunga's Avatar
    Join Date
    May 2017
    Location
    Northeast Indiana
    Posts
    1,022
    Iíve been look at the core 4x4 as well. I think the tier 3 and tier 4 are actually the same arm for the front uppers. They are the same price. The tier 2 just have a little bit smaller tubing I believe. I donít think they come with replacement bushings for the axle side. If they do that may be the difference in the 3&4. Iíve been meaning to email either them or Bubba to clarify.

  3. #3
    Been Around the Block Braxtonsag's Avatar
    Join Date
    Jan 2018
    Location
    Central Indiana
    Posts
    272
    Yeah the description on their website says they come with either rubber flex joint or one welded one forged Johnny joint. I THINK youíre right about 3 and 4 being the same, just wish theyíd list it differently on their website to avoid confusion.

  4. #4
    Knows a Thing or Two TheGrendel's Avatar
    Join Date
    Aug 2014
    Location
    Austin
    Posts
    943
    Clayton or Synergy arms with dual durometer bushings. No need to grease.

    Clayton Overland+ uses the new durometer bushing. They flex very well. Made very well. And priced great.

Similar Threads

  1. New JKU-help deciding 2.5 or 3.5 lift
    By Resqnu in forum Jeep JK Wrangler
    Replies: 3
    Last Post: 10-21-2016, 02:36 AM
  2. Deciding on what lift?
    By TimOHthy in forum Jeep JK Wrangler
    Replies: 14
    Last Post: 01-22-2016, 10:47 PM
  3. Deciding on what lift?
    By TimOHthy in forum General Jeep Stuff
    Replies: 0
    Last Post: 01-22-2016, 06:04 AM
  4. Need help deciding on a lift..............
    By lgarrett65 in forum Member Jeep Builds
    Replies: 11
    Last Post: 09-29-2015, 10:12 PM
  5. Need some help deciding
    By tommybahama in forum Jeep JK Wrangler
    Replies: 12
    Last Post: 12-22-2014, 01:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ďwayoflifeĒ is a moniker that Iíve been using for 20 years now and I chose it because I think it does a great job of explaining, in simple terms, the passion I have for Jeeps and the Jeep way of life. This is a lifestyle that transcends age, gender and race as the only thing you need to be a part of it is a love for the outdoors, a desire to explore, a yearning to take on a challenge and a will to conquer it. Over the years, Cindy and I have attempted to capture the essence of this lifestyle through photographs and videos and share it with others around the world. And, this is how WAYALIFE was born.
Join us
WATCH OUR VIDEOS