TreyS1's 2015 JKUR HR

treys1

Member
Hey everyone!

Starting this late as it is kind of the end of this stage, with more to come I'm sure (as it always does!). This is my second JK that I picked up right before a move from Atlanta to Las Cruces NM. My last JK was a silver 2 door that I let go several years ago and have been Wrangler-less since (although there were a couple GC's in there). I knew with the move out west that it was time for another.

It is a 2015 JKUR HR | Auto | Tank

When I picked it up it already had a 2.5" RE Coil Lift, 315/70r17s on the stock wheels and spacers & an Alpine Restyle system. This was good enough to make the journey from GA to NM!

IMG_20200811_181512 (2).jpg IMG_20200829_184437.jpg IMG_20200831_140526.jpg



Got it to NM and a winch was already waiting at the new house (and an engine skid....no pics)!

IMG_20200904_202643.jpg IMG_20200904_234236.jpg IMG_20200904_234256.jpg IMG_20200905_005543.jpg



Cut fenders are great but I have always been a big fan of tube fenders. Had Genright on my last JK but wanted something a little more cost effective this time and wanted black out of the box. Went with the Aries aluminums and I am actually quite impressed for the $. Put a Cobra 75 CB in & did a license plate relocations as well. (The view is from right by the house :rock:)

PXL_20201024_174141210 (2).jpg



Knowing I had 37's and a bunch of other stuff on order, I installed front and rear adjustable track bars + a rear track bar bracket and did a trim job on the Hard Rock rock rails:

PXL_20201114_175222652.jpg PXL_20201114_180046469.jpg PXL_20201114_184345291.jpg



And finally, I picked it up last week from:
  • Completing a RE 2.5" Superflex Lift (added all control arms).
  • Fox 2.0 PS Reservoir Shocks
  • G2 Gears
  • Alloy USA Shafts Front & Rear
  • RE 1310 Driveshafts
  • Truss & Gussets
  • Teraflex HD Adjustable Ball Joints
  • BFG 37x12.50r17 KM3's on Procomp 97 Matte Black Wheels

PXL_20201126_183647589 (2).jpg PXL_20201126_174201856.jpg PXL_20201127_181604793.jpg


And now it's just a matter of putting a few hundred more easy miles on it for the final gear checkup and looking forward to hitting it!

PXL_20201127_183100769 (2).jpg
 

bmkrinne

Active Member
Nice work! I’ve been thinking about the Aries fenders for awhile. How is the fit and finish of them? Any issues installing?


Sent from my iPhone using WAYALIFE
 

treys1

Member
Nice looking Jeep - love that color!

Nice! That tank color is awesome! :rock:

Thanks! I am loving the color myself even thought I have been partial to silver in the past. I think the Tank goes well with all the black other stuff.


Nice work! I’ve been thinking about the Aries fenders for awhile. How is the fit and finish of them? Any issues installing?


Sent from my iPhone using WAYALIFE

Thanks! I replied to your PM, but I'll put it here for others as well. The finish was great out of the box and the install went off without a hitch (using a REAL nutcert tool). The one complaint some people have on the fitment which my set has as well is between the front most 2 bolts on the front fenders there is about a 1/8-1/4" gap between the plate on the fender and body. It does NOT bother me personally and I only ever noticed it when I was installing and it has never again caught my eye. For the $ I would 100% buy them again.


Your jeep looks great [emoji106]

Sent from my Pixel 2 XL using WAYALIFE mobile app

Thanks!
 

Mountainjk10

Caught the Bug
Nice Jeep! And great color! I am bias to the color of course. [emoji106]
Adjustments.jpg


Sent from my iPhone using WAYALIFE
 

treys1

Member
My inner fenders were SUPER rattly so my huge accomplishment for the week was to split some silicone tube down the side and slip it on where they were rattling against the spring buckets. Need to get some black tubing now that I confirmed it resolved the rattling.

My gear break in miles are done and the check is scheduled for next weekend, looking forward to hitting the trails!
 

Attachments

  • PXL_20201206_014423361.jpg
    PXL_20201206_014423361.jpg
    96 KB · Views: 106

treys1

Member
Since the last update I have finished my gear break in miles and have since been on a few trail rides. Everything is working pretty good!

Also added a Barnes 4wd Aluminum Steering kit and some rancho rear LCA / shock skids (front LCAs have weld on skids already).

PXL_20210101_195028001~2.jpg

PXL_20201220_203524596.jpg


Next on the list will be a PSC Big Bore box but I am still deciding on the final iteration of it AND I have now sprung a very minor trans leak that will need to be sorted out.....
 

treys1

Member
Got my KMC Hex's mounted up this week and tested out today. Test run was 12psi and everything was all good!

PXL_20210116_195511500~2.jpg
 

treys1

Member
Looks really nice! I really like the black with silver ring. BTW, are those wheels hub-centric or lug-centric?


Sent from my iPhone using WAYALIFE

Thanks! Yeah, I have always been a fan of the black wheel and machined ring. I am 99% sure that these in the 17x9 / 5x5 size are hubcentric.

A couple more pics:

PXL_20210117_170540766.jpg

PXL_20210117_170302472.jpg
 
Top Bottom