My JK 2008 is pulling left!

WJCO

Meme King
I have done everything you can imagine to stop this.

I am giving up. :thinking:

Do you have an alignment print out to share? What kind of tires are you running? Have you rotated front tires side to side to see if pull changes direction?
 

-AINOKEA-

Hooked
I have done everything you can imagine to stop this.

I am giving up. :thinking:

[emoji112] just keep the wheel turned to the right. Lol. What tires you running?

Edit: nvm. Post up the alignment printout as mentioned.

Sent from my iPhone using WAYALIFE
 

Frederick

New member
Do you have an alignment print out to share? What kind of tires are you running? Have you rotated front tires side to side to see if pull changes direction?

I did rotate the tires side to side thinking it was a radial pull. I got the Yokohama geolandar g003. Very similar design of a Toyo OC Mt
 

BaddestCross

Active Member
Yes I do have one. A bilstein. I toke it off and It made no difference. I also put a JL factory and still pulls......
What do you think it is?
Bad alignment, bad tires, incorrect tire pressure, Nitto Trail Grapplers, bad ball joints, bad rod ends in the steering linkages, too fucking windy... I dunno, what have you done so far? [emoji849]



--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
 

Frederick

New member
Bad alignment, bad tires, incorrect tire pressure, Nitto Trail Grapplers, bad ball joints, bad rod ends in the steering linkages, too fucking windy... I dunno, what have you done so far? [emoji849]

--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
I run 30 psi. All my steering components are new. I am very picky. I have new adjustable synergy arms. Teraflex track bar. The axle is centered perfect! Tires are new. Nothing is worn out
 

BaddestCross

Active Member
I run 30 psi. All my steering components are new. I am very picky. I have new adjustable synergy arms. Teraflex track bar. The axle is centered perfect! Tires are new. Nothing is worn out
Alright... So as asked above, have you had it on an alignment rack and gotten a printout? Pulling and flighty steering sounds like it might be a caster issue. You triple-checked the torque on all the suspension components?



--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407
 

Frederick

New member
Alright... So as asked above, have you had it on an alignment rack and gotten a printout? Pulling and flighty steering sounds like it might be a caster issue. You triple-checked the torque on all the suspension components?



--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407

Track bar and draglink are parallel to each other. The only thing is that the rear axle is off by a 1/4 inch to the left
 
Top Bottom