Fire Extinguisher

[jkwebbie]

I'm wanting to get a fire extinguisher for the Jeep and was wondering where everyone got theres? I don't want to get a crappy Wal-Mart extinguisher that won't work when I need it (hopefully I'll never need it). And also where did you mount it or store it in your Jeep?
Thanks for all the help guys!!!!

 

[MedixJK]

Check out sharkeys build thread. I think theres some info in there if im thinkin of the right one.

 

[jkwebbie]

Check out sharkeys build thread. I think theres some info in there if im thinkin of the right one.

Thanks bud! I'll go check it out

 

[Peak]

You want to get a BC extinguisher. Those are rated for electrical and chemical fires. An ABC will harm your engine. I picked up mine off amazon for $30, it's made by Kidde. They also sell mounts on there for less than $10. I plan on mounting mine to the seat bracket on both driver and passenger.

 

[Sharkey]

BC for use in the engine bay, ABC for general use outside of the vehicle. Having both is a good idea, especially if you camp with a campfire.

 

[jkwebbie]

You want to get a BC extinguisher. Those are rated for electrical and chemical fires. An ABC will harm your engine. I picked up mine off amazon for $30, it's made by Kidde. They also sell mounts on there for less than $10. I plan on mounting mine to the seat bracket on both driver and passenger.

BC for use in the engine bay, ABC for general use outside of the vehicle. Having both is a good idea, especially if you camp with a campfire.

Thanks guys! I planned on getting at least 2, one for driver side and one on the roll bar on the passenger side

 

[RjSkippy]

Where I mounted my BC.

 

[GoldenJK]

Make sure is easy access. Here's mine

 

[jkwebbie]

View attachment 171943View attachment 171943

Where I mounted my BC.

I like it! Where did you get the mounts at?

Make sure is easy access. Here's mine
View attachment 171984

Yea I planned on having mine within arms length, maybe putting it in the map pocket on the back of the seat

 

[2011jk]

My Halon mounted in the rear

 

[T&ERun]

My Halon mounted in the rear

What is the metal structure (what brand or is it something you made) and what is it that the wires are running to?

 

[AllAmericanInfidel]

What is the metal structure (what brand or is it something you made) and what is it that the wires are running to?

Springtail solutions MPAC

 

[T&ERun]

It's hard to tell in the picture. What are the wires running to? Air compressor?

 

[Speedy_RCW]

I got a 2.5lb Kidde ABC and some heavy duty Velcro from Home Depot and mounted it to the roll bar. Just keep an eye on the charge indicator and you'll be fine. I'm planning on getting another to mount to the drivers seat bracket to have one in closer proximity as well.

 

[2011jk]

No the wires are for powering a plug that I can use to charge my Maglight.
I also have a connector if I ever want to use my Battery tender.
I have a Warn plug and jumper kit wired to the battery so if I need to jump someone on the trail its easy.
I have welding cables running from the rear battery to the front where the Painless dual battery relay is.

My arb compressior is mounted inside the fender area behind the passenger tail light.

 

[rinkishjk]

I have two, a larger one in back.