Who's running a 2" to 3" lift w/ 37's (Got Pics?)

[dgriz]

As I get closer to upgrading to larger tires, I'm starting to wonder if I might be able to stuff a 37" tire under my JKU with 2" JKS Jspec lift. I've already got the bump stops in, have a stubby front bumper, and plan to run flat fenders. What else would it take to run 37's if I choose to go that route? Will they fit with this set-up or will I need to trim or lift more?

Please show pics if you've done this.

 

[BadApple]

I would trim at least. I run 35s on mine with a 2 inch lift and never have rubbing issues. I work with a guy that has rubicon take off springs running 37s with new bump stops

 

[MANUEL]

Im running rc bb 2.5 in the front and 2 inch rear on 37 with extended bumb stops and trim flat fenders and I also had to cut the pinch seam and the rubi rail.

 

[dgriz]

Im running rc bb 2.5 in the front and 2 inch rear on 37 with extended bumb stops and trim flat fenders and I also had to cut the pinch seam and the rubi rail.

Now that's what I'm talking about! That looks great! Have you had it off-road to test the flex?

 

[10frank9]

You might want to get 1" spacers. Cheap and it will give you better clearance and peace of mind.

I've got the 3" EVO Enforcer on 37's.

 

[MANUEL]

Hell yeah I have been off road with it and no issues I just got to dial in the from bump stops little more.

 

[Moochie]

Close to 3" with bolt on coil overs.

 

[dgriz]

So they do fit with as little as 3" lift I guess. Besides flat fenders, front bumper, and pinch seam, are there any other potential rubbing areas? Did you need bigger bump stops?


Sent from my iPhone using WAYALIFE mobile app

 

[MANUEL]

And also if your running a rubicon your gonna have to cut the rock rail about a 1 1/2 off. For bump stop in the front im running a 3 inch stop which is a little big when i get a chance im gonna replace it with a 2 1/2 stop

 

[YKPizzaGuy]

3" with 37" tires. Had to trim the seam and a bit of the well. But there is still a tiny bit of rub at full flex. And I had to turn the front bumper into a stubby.

 

[Desertrat_rubi08]

[/IMG]

Running 2.5" and 37s

 

[rtguy1]

proper bumpstops, wheel backspacing or spacers, trimmed pinch seams/rubi rails, stubby bumper(you'll rub the stock bumper), and trimmed/flat fenders if you want any uptravel.