Jk Axles, wheels tires and driveshafts

[sfrubicon]

Selling my rubi axles out of my 12 JK. Moving on to 1 tons. Both are setup for the Evo double throw down and lever. Front had the Rock Krawler pro tie rod and is sleeved and gusseted. Has 4.10 and the rubicon locker.
Rear locker doesn't work and a shaft is broken, asking 2500 for both OBO.

37 mud grapplers on black steel wheels, asking 1000 OBO

JE REAL 1310 front and rear drive shafts and poison spyder wheel spacers (4).

I'll post up pics of all soon.

 

[hbkid22]

Selling my rubi axles out of my 12 JK. Moving on to 1 tons. Both are setup for the Evo double throw down and lever. Front had the Rock Krawler pro tie rod and is sleeved and gusseted. Has 4.10 and the rubicon locker.
Rear locker doesn't work and a shaft is broken, asking 2500 for both OBO.

37 mud grapplers on black steel wheels, asking 1000 OBO

JE REAL 1310 front and rear drive shafts and poison spyder wheel spacers (4).

I'll post up pics of all soon.

Where you located and would you consider selling the front axle only? And how many miles on the axles?

 

[bkac]

Where are you located?

Sent from my VS980 4G using WAYALIFE mobile app

 

[noroad]

what are the 1310s to a 2dr/4dr auto/stand?? how much for wheel spacers?

 

[sfrubicon]

I would split up the axles, I'm located in Colorado Springs, CO and the axles have 12k on them. Drive shafts are out of a 4 door.

 

[noroad]

I would split up the axles, I'm located in Colorado Springs, CO and the axles have 12k on them. Drive shafts are out of a 4 door.

ok is it an auto or standard and how much lift!

 

[bkac]

How much for the rear ds?

Sent from my VS980 4G using WAYALIFE mobile app

 

[sfrubicon]

Rear axle comes out tomorrow and the rear wheels will be off

 

[sfrubicon]

Auto and I had it at about 4 inches, 100 for the rear drive shaft

 

[noroad]

Auto and I had it at about 4 inches, 100 for the rear drive shaft

thanks i was looking for a standard front owell.

 

[Panda]

Auto and I had it at about 4 inches, 100 for the rear drive shaft

How much for the front driveshaft? Will you ship it?

 

[hbkid22]

I am in Fort Collins. I am interested in the front but since you did the DTD and I will not be doing that, are there issues with converting it back?

 

[sfrubicon]

I would do 75 for the front drive shaft

 

[sfrubicon]

I am in Fort Collins. I am interested in the front but since you did the DTD and I will not be doing that, are there issues with converting it back?

To change it back you just need the coil perches, everything else is the same

 

[hbkid22]

To change it back you just need the coil perches, everything else is the same

What would you sell it for? I would like to upgrade but might not be in the market as soon as you would want. I could be 2-3 months out.

 

[sfrubicon]

What would you sell it for? I would like to upgrade but might not be in the market as soon as you would want. I could be 2-3 months out.

Looking for 2k

 

[hbkid22]

Looking for 2k

$2k for the front? I'll shoot you a pm tomorrow on it if that works.

 

[Panda]

I would do 75 for the front drive shaft

Pm sent :thumb:

 

[sfrubicon]

$2k for the front? I'll shoot you a pm tomorrow on it if that works.

Sounds good

 

[OverlanderJK]

I'll take the front shaft of panda doesn't.