looks like running a 3"+ lift with stock shocks. look at the track bar bracket and bumpstops.
Is that photo at rest, or is the suspension compressed? Looks like you have less than an inch of up travel before bottoming out those shocks. Also your lower shock bolts are backwards, they should go the other way so a rock doesn't mess up the bolt threads.
This is all very interesting. Would using this relocation allow me to run the same length shocks as stock but with a 2" lift?
My immediate thought is yes, but I wasn't sure what I might be missing, plus not sure what to do at the front, bar pin eliminator bracket maybe? Assuming, of course, there is one to eliminate. There was on my TJ.
Sent from my SM-N910V using Tapatalk
zimm, what length shocks you running and bump? Also did you use any upper shock mount relocation bracket? I installed my rockstars recently but either need to run shorter shocks, about 1'' more bump, or relocate the upper shock mount to regain the uptravel I lost. just looking for other peoples setups that work well and already have rockstars. thanks in advance!
zimm, what length shocks you running and bump? Also did you use any upper shock mount relocation bracket? I installed my rockstars recently but either need to run shorter shocks, about 1'' more bump, or relocate the upper shock mount to regain the uptravel I lost. just looking for other peoples setups that work well and already have rockstars. thanks in advance!