Evo 1/4 pounder

[Jk909]

So after debating on what bumper to buy for the last couple of months I finally decided to pick up the 1/4 pounder. After i installed it I wasn't sure about what I should do with the wires for the fogs. Did you guys use them for something else or cut them off?

 

[olram30]

Used them for my light bar.

 

[Jk909]

Used them for my light bar.

Doesn't it turn off though with your high beams

 

[olram30]

Doesn't it turn off though with your high beams

Yeah, I think so. But with the truck lights the high beams are plenty for me.

 

[Jk909]

That's true. Did you have to get a special relay or anything?

 

[lmaya]

Yeah, I think so. But with the truck lights the high beams are plenty for me.

If you're looking for led's I would go with Baja designs...

I have both BD and rigid...and the BDs are better imo.

 

[thardy]

Put the factory fogs back on but attach them up out of the way and turn them into rock lights.

 

[Torqt JK]

Put the factory fogs back on but attach them up out of the way and turn them into rock lights.

I thought about doing this also but didn't know where to attach them without them getting ripped off at full stuff on the rocks. :thinking: Where/how did you attach? Any pics?

 

[Coloradan]

I thought about doing this also but didn't know where to attach them without them getting ripped off at full stuff on the rocks. :thinking: Where/how did you attach? Any pics?

I put mine back on with a quick, homemade bracket

 

[ITLL GO]

I put mine back on with a quick, homemade bracket View attachment 161158View attachment 161159

Nice work, that turned out great!

 

[Jk909]

I put mine back on with a quick, homemade bracket View attachment 161158View attachment 161159

That's a great idea

 

[Hot94Z28]

I want this bumper, but I do like and want to keep fog lights or something like them that's why I have not bought this bumper yet

 

[KenB1010]

I installed a set of D2s using the factory fog light wiring. I use a traildash program to allow use of the D2s with the high beams. Like many others I had a flashing issue with the LEDs installed in the factory wiring. I installed a resistor in front of the D2s and solved the flashing issue.

 

[Sharkey]

I put mine back on with a quick, homemade bracket View attachment 161158View attachment 161159

Find a grade 8 bolt that will work with a light mount and move the fog lights outbound to the stinger mount. Then you can still run higher power lights inside the stinger down the road.

 

[10frank9]

I found a cheap set of Cree LED fogs on Amazon and wired them directly to my stock fog light harness. No flickering for me. Works great too.

I mounted them in the T slot of the 1/4 pounder.

 

[dillard09]

I want this bumper, but I do like and want to keep fog lights or something like them that's why I have not bought this bumper yet

There are many ways you can mount fog lights to the 1/4 pounder. You can use the T slots with bigger washers, mount outboard of the stinger with the bolts for the stinger, homemade mounts, or just use the fairlead mount for the offset like one below.

http://www.northridge4x4.com/evo-manufacturing-fairlead-light-mount-plate-offset-evo1105b

Don't let the lights deter you from and awesome bumper!

 

[t8er]

Mine are on the outside bolts. Currently they're on a switch but I'm going to install the DOT legal fog lights from rigid soon

 

[Coloradan]

Fine a grade 8 bolt that will work with a light mount and move the fog lights outbound to the stinger mount. Then you can still run higher power lights inside the stinger down the road.

That's a great idea! I could move the stock fogs down to the hilift T as well

 

[10frank9]

You can use the T slots with bigger washers, mount outboard of the stinger with the bolts for the stinger...

I could move the stock fogs down to the hilift T as well

Great idea! :cheesy:

 

[Hot94Z28]

I found a cheap set of Cree LED fogs on Amazon and wired them directly to my stock fog light harness. No flickering for me. Works great too.

I mounted them in the T slot of the 1/4 pounder.

View attachment 161162

I like that idea, plus those look like the ones I have on my A-Pillar.