GraniteCrystal build thread

GraniteCrystal

GraniteCrystal

New member
Worked a bit on the taillight guards Catahoula generously gave me for free (thanks again!). Been a nice little project to give me something to do while I save for 37s.

Their original state
1478920290185.jpg

Wire brush to strip the paint off
1478920313954.jpg

All cleaned up
1478920334490.jpg

Test fit
1478920369644.jpg

Primed them with some aluminum primer
1478920386695.jpg

If you've ever wondered what it looks like behind a taillight
1478920425872.jpg

I'll be painting them black with some Rustoleum truck bed liner tomorrow.


°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
http://wayalife.com/showthread.php?p=621404
 
GraniteCrystal

GraniteCrystal

New member
I cleaned out the garage this weekend and came across some old parts from when I did this:
http://wayalife.com/showthread.php?p=772809

One of those parts was the flashlight portion of the compressor.

1479076152325.jpg

Got me wondering if it still worked. So I stripped it down and wired (loosely speaking) it up to 4 AA batteries:

1479076219099.jpg

Couldn't take a photo and hold the batteries/wires at the same time, but it lit up!

So now I'm trying to think of a place to mount it in the Jeep. Got any ideas?

°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
http://wayalife.com/showthread.php?p=621404
 
GraniteCrystal

GraniteCrystal

New member
Labricon said:
Under hood?


Sent from my iPad using WAYALIFE mobile app
Click to expand...
That's an interesting idea. Definitely would be nice to have when broken down at night and may be able mount in a less permanent way than in the interior. No telling how long this light will hold up so would prefer to not do something super custom just for it.

°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
http://wayalife.com/showthread.php?p=621404
 
GraniteCrystal

GraniteCrystal

New member
Playing around with the idea of mounting a wreath on the spare tire and lighting it up with Christmas lights. Anybody done it before? Any tips/tricks? Thinking I'll need to find some lights that plug into the 12V power in the back and just route the wire through.

Something like this:
Screenshot_20161123-151658.jpg

°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
http://wayalife.com/showthread.php?p=621404
 
scull20

scull20

New member
GraniteCrystal said:
Playing around with the idea of mounting a wreath on the spare tire and lighting it up with Christmas lights. Anybody done it before? Any tips/tricks? Thinking I'll need to find some lights that plug into the 12V power in the back and just route the wire through.

Something like this:
View attachment 231948

°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
http://wayalife.com/showthread.php?p=621404
Click to expand...

That's a cool idea! I may look into it myself. You can always get a small power inverter to run a set of 120v lights too.
 
cozdude

cozdude

Guy with a Red 2-Door
GraniteCrystal said:
Playing around with the idea of mounting a wreath on the spare tire and lighting it up with Christmas lights. Anybody done it before? Any tips/tricks? Thinking I'll need to find some lights that plug into the 12V power in the back and just route the wire through.

Something like this:
View attachment 231948

°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
http://wayalife.com/showthread.php?p=621404
Click to expand...

I do that but without the Xmas lights every year! Shouldn't be to hard to wire the lights in
 
cozdude

cozdude

Guy with a Red 2-Door
scull20 said:
Im tempted to wire it with white lights that are on all the time, and then a string of red lights wired into the brake light.
Click to expand...

Shouldn't be to hard. You can get a trailer hitch harness and splice it in so that the white is hot when your marker lights are on and wire the reds into the brake light side of it
 
GraniteCrystal

GraniteCrystal

New member
So I'm driving to Trail Jeeps today and notice the rattling from the roof rack is way louder than usual. I pull over to inspect and the washer/nut on the right side in the rear is gone. !!! So I drove it real slow the rest of the way and Wes hooked me up with a new washer and nylon inserted nut. Thanks Wes!

IMG_20161125_140910.jpg

There's always been a bit of rattle from the roof rack but I assumed that was standard. Now I'm pretty sure that nut was probably loose the whole time, slowly working it's way off. It finally falling off completely may have been a good thing as now it seems to be much quieter going over bumps.

°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
http://wayalife.com/showthread.php?p=621404
 
Mike_JK_Houston_711

Mike_JK_Houston_711

New member
GraniteCrystal said:
So I'm driving to Trail Jeeps today and notice the rattling from the roof rack is way louder than usual. I pull over to inspect and the washer/nut on the right side in the rear is gone. !!! So I drove it real slow the rest of the way and Wes hooked me up with a new washer and nylon inserted nut. Thanks Wes!

View attachment 232173

There's always been a bit of rattle from the roof rack but I assumed that was standard. Now I'm pretty sure that nut was probably loose the whole time, slowly working it's way off. It finally falling off completely may have been a good thing as now it seems to be much quieter going over bumps.

°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
http://wayalife.com/showthread.php?p=621404
Click to expand...

This happened to me last week on one of the hinge nuts on my psc tire carrier. I have to remember to retorque them every few months. Glad that sucker didn't fall apart on ya!


Sent from my iPhone using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom