GraniteCrystal
New member
Ha, yes, still here. Just wrapping up the driveshaft installation. And no, haven't stopped smiling yet. Gonna go take it for a spin around the block to see how the driveshaft performs.
GraniteCrystal build thread
- Thread starter GraniteCrystal
- Start date
GraniteCrystal
New member
Driveshaft installed. I mostly followed Eddie's write up with a few exceptions.
First, the o-ring on the t-case side from the original driveshaft needed to be reused. Here it is in the old one:
Transferred to the new one:
Second, there's no specified torque on the four bolts on the t-case side, shown here:
Based on some research, 80ft lbs is about right. I couldn't get a torque wrench on it though, so I applied a healthy amount of red Loktite and torqued it down pretty tight without going gorilla on it.
Also, using a jack stand to support it while attaching was a huge help.
Here it is all finished up:
First, the o-ring on the t-case side from the original driveshaft needed to be reused. Here it is in the old one:
Transferred to the new one:
Second, there's no specified torque on the four bolts on the t-case side, shown here:
Based on some research, 80ft lbs is about right. I couldn't get a torque wrench on it though, so I applied a healthy amount of red Loktite and torqued it down pretty tight without going gorilla on it.
Also, using a jack stand to support it while attaching was a huge help.
Here it is all finished up:
jkris
New member
Awesome job! You will have to let us know how it goes after your test drive!
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
GraniteCrystal
New member
Feels good! No vibrations up to 70mph
jkris
New member
TheGrendel
Active Member
Looking good.
GraniteCrystal
New member
Car wash time!
Ravines showing off their water draining design
Ravines showing off their water draining design
Mike_JK_Houston_711
New member
Looking good! Good little tip on the jack stand to support one side of the driveshaft during installation. I'll have to do that when I install my rubi swaybar after the no limits come in the mail.
GraniteCrystal
New member
Out for a joy ride 
Napalm
New member
Clutch
Caught the Bug
These tires are way too big! You should get some smaller ones. Haha
Sent from my XT1080 using WAYALIFE mobile app
catahoula
Caught the Bug
Rubicon310
New member
aWIGHTguy
Banned
Those ATX Ravines are really growing on me. Maybe it's just the color matching...not sure. Either way, it's looking great man!
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
Mike_JK_Houston_711
New member
Awesome pics. This one is my favorite. Really shows how big those tires are.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
GraniteCrystal
New member
Thanks!
Yeah, I kind of miss my 33s. Wait. No, no I don't.
Up Lookout Mountain and down the other side into Red Rocks
Thanks!
Thanks! Trying not to be too matchy matchy and thus far I'm digging them.
Thanks! Yeah, it's easy to make 37s look big.
Thanks!
GraniteCrystal
New member
Some comparison shots between my 33s (265x70r17) and my new 37s (37x13.5r17)
Crazy to think it was on 33s and had a roof rack less than 2 months ago.
Crazy to think it was on 33s and had a roof rack less than 2 months ago.
Rubicon310
New member
Have you noticed any rubbing? During a full turn or flex?
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
GraniteCrystal
New member
Yeah, I dipped down going into a parking lot and it rubbed on the way up. Definitely going to trim them.