Painless Performance Wayalife Member Discount - THROUGH FRIDAY

If you use promo code Wayalife15 between now and Friday, you will receive 15% off of your total order. :rock:

www.buypainless.com

Note: the 15% cannot stack with our current $100 rebate on EFI and Chassis Harnesses, but will work on Trail Rockers and other relay kits.
 
Last edited:
Awesome deal! Do you sell the parts to convert my Trail Rocker with the lower dash switch panel to an above the mirror switch panel?


Sent from my iPhone using WAYALIFE mobile app

We aren't going to offer the different panels by themselves to avoid confusion from a retail sales standpoint.

We can likely figure something out for you, but it's probably a few more months before we will have a work-order producing the overhead mounts switch panels.
 

Wheatbackdigger

New member
Just finished installing mine. Should of waited a couple weeks before purchasing. Awesome product by the way. Install was easy, the instruction manual with colored pictures was spot on. I never did figure out what this was though. IMG_1139.JPG . Ended up changing the switches out for some dual LED's with new switch covers. IMG_1140.JPG . I don't contribute much to the forum, but I do highly recommend this product.


Sent from my iPhone using WAYALIFE mobile app
 
Just finished installing mine. Should of waited a couple weeks before purchasing. Awesome product by the way. Install was easy, the instruction manual with colored pictures was spot on. I never did figure out what this was though. View attachment 248298 . Ended up changing the switches out for some dual LED's with new switch covers. View attachment 248299 . I don't contribute much to the forum, but I do highly recommend this product.


Sent from my iPhone using WAYALIFE mobile app

Glad you got it all installed!

That is the weatherpack connector for the winch add-on. Included is this pig tail (which plugs into that connector and runs to the winch).

JlNFeqf.jpg


If you decide to add a winch, you just need to buy our p/n 57150 winch add-on switch, that gives you a momentary on-off-on switch to replace one of your on/off switches. Unfortunately, some of the kits got updated to the winch control before the manual reflected it. I will work this morning to update all of the installation manuals on the website.

All the photos are missing on your site for these pages:

https://buypainless.com/collections/jeep-1/products/57000

https://buypainless.com/collections/jeep-1/products/57003

Trying to see the installed photos and get an idea. Thanks!

We noticed the images were down on buypainless.com yesterday and are looking into it.

If you go to our main website, the images still show for all of the kits: http://www.painlessperformance.com/webcatalog/trko

Thanks!
 

Wheatbackdigger

New member
Glad you got it all installed!

That is the weatherpack connector for the winch add-on. Included is this pig tail (which plugs into that connector and runs to the winch).

JlNFeqf.jpg


If you decide to add a winch, you just need to buy our p/n 57150 winch add-on switch, that gives you a momentary on-off-on switch to replace one of your on/off switches. Unfortunately, some of the kits got updated to the winch control before the manual reflected it. I will work this morning to update all of the installation manuals on the website.



We noticed the images were down on buypainless.com yesterday and are looking into it.

If you go to our main website, the images still show for all of the kits: http://www.painlessperformance.com/webcatalog/trko

Thanks!

Thanks for the clarification. I do have a on-off-on momentary switch already installed, just need to figure out how to wire it to the winch. Once again, nice product.


Sent from my iPhone using WAYALIFE mobile app
 
Top Bottom