USMMA11NC
Caught the Bug
That would be super helpful man, thanks a lot! Also, did you just splice them into the factory taillight harness for power, or did you use a relay/switch setup?
Sent from my Pixel 2 XL using WAYALIFE mobile app
Relay/switch setup. Mine is a simple SPST rocker and a standard 12V relay but you can get fancy and use a three-way switch and relay for ON-OFF-ON W/ STOCK LAMPS or simply tap into the reverse lamp wiring to control your relay. You should be fine running the LED lamps without a relay but I'm of the mindset that the relay provides an added safety factor. As always: check whatever wiring you use to ensure it is rated for the amperage you plan on drawing.