Show off your homemade parts.

Custom Rear Shelf

527105_3932767912505_47921777_n.jpg318445_3932768712525_1944511957_n.jpg10482_3932769472544_722513057_n.jpg391710_3932770472569_1245799001_n.jpg

Hi Guys

Knocked this up one weekend, wanted to be able to provide a shelf for the four legged friends to enjoy the view plus to still have room below, also serves well to stop prying eyes not being able to see in the back. Shelf is from Bestop and made up custom bar work with wing nuts for easy removal.
Works well when on the Trail for MaxTrax, and stuff!
 
<img src="http://wayalife.com/attachment.php?attachmentid=21306"/><img src="http://wayalife.com/attachment.php?attachmentid=21307"/><img src="http://wayalife.com/attachment.php?attachmentid=21308"/><img src="http://wayalife.com/attachment.php?attachmentid=21309"/>

Wow that turned out really well!
 
I haven't built it yet, but I want to build a storage box to keep my gear in while camping. It also still allows me to sleep in my Jeep. Here are some drawing of my idea.

View attachment 8699View attachment 8700View attachment 8701.

Looks like the Chuckwagon Box I made way way back when I was a boyscout. Was planning to do the same on my JKU and make it rails but also fully removable/free standing (for when I'm not in the field it's out of the JK). Attached it could be under a roofrack connected tarp. Then on rails beside it possibly an ARP(or other) fridge/freezer.

The other possibility is this
Grub Hub Kitchen in a suitcase
 
Last edited:
My front bumper is only partially homemade. I shortened the ends of the Mopar off-road bumper so that it didn't look like a skinny, old-time mustache.
470478_3141955901138_680951974_o.jpg
 
thanks!

I'm doing another one! no fog, and recessed winch mount. Sold this one to a friend who ordered a '13 :p, same baseline model.

Also doing plans for rocker skins, rock sliders, and tire carrier :rock:
 
Cruchers Corner pure jeep sliders combo/d44 10$ truss/Front sway bar protection

These are photos of my crusher corners blended with my pure jeep sliders I made from a sheet of 3/16 steel and my 90Amp buzz box before I got my miller 211 auto-set :bleh:
There are also a few picks off the e-disc sway bar protection plate I made last year after installing best tops cheapo bumper this was made with some of the remnants of the 3/16 for the corners and some bolts from Tacoma nut and screw . :wings:

The last are photos of my 10$ 1.5 .120 DOM truss I bought out of the remnants bin here at Everett Steel. :rock:

20150816_140124.jpg

20150816_140131.jpg

20150816_140325.jpg

20150816_140308.jpg

20150816_140357.jpg

20150816_140414.jpg

These are real diy products every one can do in there driveway with a grinder, decent welder (welding to carrier housing can be fun) and a few brain cells

Thank you for looking at my photos have a wonderful Sunday

Sincerely,

Rubi'
 

Attachments

  • 20150816_140225.jpg
    20150816_140225.jpg
    59.4 KB · Views: 311
Last edited:
Top Bottom