Tie rod rubbing

MSJKU11

MSJKU11

Caught the Bug
Little confused about this. Just installed what looks like a rpmfab tie rod which requires a minimum backspacing of 4.75. The wheels I have look like procomp 29 series which is exactly 4.75. The passenger seems to be rubbing more than the driver side. 20180612_195501.jpg20180612_195510.jpg

Sent from my SAMSUNG-SM-G930A using Tapatalk
 
MSJKU11 said:
Little confused about this. Just installed what looks like a rpmfab tie rod which requires a minimum backspacing of 4.75. The wheels I have look like procomp 29 series which is exactly 4.75. The passenger seems to be rubbing more than the driver side. View attachment 303579View attachment 303580

Sent from my SAMSUNG-SM-G930A using Tapatalk
Click to expand...

Looks like offset GM 1 Tom TRE’s same as what I’m running on a Ruffstuff toe rod. I have 3.5 bs on my slabs and don’t have much clearance at all. Don’t think you can get by with 4.75.


Sent from my iPhone using WAYALIFE mobile app
 
That’s weird, I installed an RPM Fab tie rod last weekend, with the GM offset one ton ends. I have the Method Standard wheels 17x9, 4.5 backspacing, -12 offset. I have a nice amount of clearance. IMG_1649.jpgIMG_1651.jpg


Sent from my iPhone using WAYALIFE mobile app
 
Maybe it's not rpmfab. Not sure who made it but doesn't look like it's gonna fit. I really didn't want spacers but if I want to keep it I don't think I can any other way. Thanks for the help guys.

Sent from my SAMSUNG-SM-G930A using Tapatalk
 
Speedy_RCW said:
I suppose depending on if you still have a factory tie rod or not. Just got the feeling you didn’t want to run spacers.


Sent from my iPhone using WAYALIFE mobile app
Click to expand...
I have no experience with them personally just have heard some bad experiences. Not ideal for me I guess but I'd rather do that I suppose that invest in another tie rod.

Sent from my SAMSUNG-SM-G930A using Tapatalk
 
MSJKU11 said:
I have no experience with them personally just have heard some bad experiences. Not ideal for me I guess but I'd rather do that I suppose that invest in another tie rod.

Sent from my SAMSUNG-SM-G930A using Tapatalk
Click to expand...

Plenty of people run them without issue. I don’t personally like them but to each their own.


Sent from my iPhone using WAYALIFE mobile app
 
Maybe just grind the casting mark off plus a little for clearance. It's barely rubbing. You will have to go a little extra for wheel flex, but it looks like the tie rod end is plenty thick enough to grind on a little.


Sent from my iPad using WAYALIFE mobile app
 
A.J. said:
Maybe just grind the casting mark off plus a little for clearance. It's barely rubbing. You will have to go a little extra for wheel flex, but it looks like the tie rod end is plenty thick enough to grind on a little.


Sent from my iPad using WAYALIFE mobile app
Click to expand...

Gotta after with AJ here. I’d bust out the grinder before slapping on wheel spacers.
 
You must log in or register to reply here.
Top Bottom