10frank9
Web Wheeler
I'll choke you out THEN let your wife stab you in the face. (see what you started Russ)?
What was done to your rig this week?
- Thread starter 10frank9
- Start date
I'll choke you out THEN let your wife stab you in the face. (see what you started Russ)?
ttfhell
New member
It's at the dealer for a light and axles are in so you're safe.
Sent from my iPhone using WAYALIFE mobile app
Sharkey
Word Ninja
Did you special order the black rings? I love the look.
Rusty
New member
Pro rock44 HD, rcv shafts, dynatrac ball joints, 4.88 gears, and arb lockers front and rear. with a new compressor in my onboard air system (pics of this to come next week as they didn't send me pictures of the OBA.
They are also welding Evo lower control arm skids to protect my new axle
They are also welding Evo lower control arm skids to protect my new axle
ttfhell
New member
Yep. Like $125 for all five if I remember.
TonkaJK1031
New member
Plasti dipped my grill.
ctlazer5
New member
did you have to cut at all? In Eddie's write up it mentions some cutting but not totally necessary and/or might have been fixed with later models of the exhaust kit.
TheRoyalDoyle
New member
Or-Fab tire carrier, and Warn Xeon 8 installed.
TheRoyalDoyle
New member
LSM
New member
Awesome looking rig. I have the same bumper.
TheRoyalDoyle
New member
Mounted some Dually D2's!!
Passenger Side:
Drivers Side:
Passenger Side:
Drivers Side:
RedFox
New member
Nice mounting solution!
thanks :thumb:
DunnyBunny
Member
Tinted my third break light finally. Forgot all bout it till someone on here pointed it out. Now it looks good. Also put in a K&N drop in filter. Noticed slight difference in pedal response but nothing major. Mainly got it cause I needed a new filter and now I don't have to worry bout replacing it again
.
.
DunnyBunny
Member
Nice. You got a write up for it at all. I have 2 soft top canvas I can't get rid of that I thought bout doing this with. Thought bout getting another header and cutting the rear section off and kind of doing it how you have your back section.
Last edited:
bob-o12jk
Banned
I bought 2.25 yards of some black vinyl from Joann's fabric store, it was on sale for $9.99 a yard versus the normal price of $19.99. Obviously u wont need that much if you have a 2 door.
Bought these grommets and bungees from harbor freight. $3.99 a pack if 50 grommets and $1.99 a pack of 4 bungees.
Here it is all sewn up with 1.5" overlaps all around. 44"x 66" total width and length after being sewn
This is when I finished the grommets,.took it on a freeway run @ 70mph and ended up adding 4 additional grommets/bungees
Sent from my SPH-L720 using WAYALIFE mobile app
I drove 30miles to work this morning @70+mph and it seems to be holding up just fine. The trick is to have a lot of grommets/bungees so the grommets dont pull out from the material
Attachments
Last edited: