What was done to your rig this week?

Changed the oil and filter at 97,000.0 miles. Also changed the oil pressure sending unit to correct an intermittent failure that was driving me crazy. Nothing picture worthy
 
Dude, I love the limb risers!!!!!! What manufacturer are they and where did you get them?)

It's funny you say that, I was considering taking them off because I have SO much shit on the front end, I thought it was starting to be too much. They're made by River Raiders and cost around $50 - $60. I think the limb risers and angry eyes are coming off to declutter the front. :icon_crazy:
 
I built a mount for my CB antenna based off the Cool Tech mount I've seen around the forums. Came out pretty good! I know the welds aren't pretty, but they're strong. ended up costing me about $4 in parts

IMG_2117.jpgIMG_2118.jpgIMG_2119.jpgIMG_2123.jpg
 
Yesterday I finally got around to installing my Rock Hard Sport Cage! Took most of the day due to taking on the mission by my self. Today I tore it all out and took it out for powder coat. The uprights and the front to rear brace are going to be gloss black, the cross bars and clamps are going to be as close a match to the silver on the dash/ air vents as I can get.( I like some of the 2 tone cages I'v seen on this forum) I'll add another pick when the re install is complete next week.

A big thanks goes out to Eddie and everyone who contributed to the installation thread!!! It made the job so much easier, and I'll be using the KC mount for my CB as well!!:beer::beer::beer:
 

Attachments

  • photo-25.jpg
    photo-25.jpg
    94.8 KB · Views: 337
Got the wheels and tires on today. Next is trimming up the fenders.
 

Attachments

  • 1421285833372.jpg
    1421285833372.jpg
    54.2 KB · Views: 330
  • 1421285848929.jpg
    1421285848929.jpg
    54.3 KB · Views: 331
  • 1421285861534.jpg
    1421285861534.jpg
    53.9 KB · Views: 321
Started painting my EVO Sliders. Sanded them with 220 followed by a few coats of self etching primer. Hopefully get around to top coating them tomorrow afternoon.

First impression of EVO is them boys sure know how to weld and build a stout product! :)

Can wait to see them welded to the Jeep!
 

Attachments

  • 1421289428786.jpg
    1421289428786.jpg
    72.3 KB · Views: 311
  • 1421289451324.jpg
    1421289451324.jpg
    63.6 KB · Views: 312
The uprights and the front to rear brace are going to be gloss black, the cross bars and clamps are going to be as close a match to the silver on the dash/ air vents as I can get.

Just keep in mind that silver may bounce the sun right up into your eyes. It might not, but it's something to consider.
 
Finally found some serious, weld on rock rails from White Knuckle offroad in Apple Valley CA. Little primer and some bedliner made them look great! I drove up to pick them up and didn't have them powder coated, so I only paid $410. ($100 for shipping and $100 for powder coat)
 

Attachments

  • rails.jpg
    rails.jpg
    57 KB · Views: 360
  • welds.jpg
    welds.jpg
    67.5 KB · Views: 362
Top Bottom