Just placed order for aluminum evo corners

utiadam · Dec 1, 2014

Well I just placed my order for the aluminum evo corners and the evo mud flap kit from Northridge. I really want to do the ORO Lite DOTs but I'm not sure how much modification is required. I found a picture of it done online but not sure if they are a member here.

ImageUploadedByWAYALIFE1417450946.713499.jpg

If not those I would be interested in these lights that I think a few members here have done. I believe JAGS is one.

ImageUploadedByWAYALIFE1417451056.644523.jpg

Any info on either one would be appreciated. Also info on required resistors please

utiadam · Dec 1, 2014

I think I found the second set of lights on Amazon and the load resistors. I used the link JAGS provided to eBay and then found all the stuff on Amazon.

ImageUploadedByWAYALIFE1417454700.242038.jpg

I may stick to a combo that I know for sure works and is about 1/3 the cost.

K.D.C.H · Dec 1, 2014

When you get the aluminum covers in please post up some pics. I'm interested to hear your thoughts on them and if the difference in weight is worth the trade off for strength over the steel ones

utiadam · Dec 1, 2014

K.D.C.H said:
When you get the aluminum covers in please post up some pics. I'm interested to hear your thoughts on them and if the difference in weight is worth the trade off for strength over the steel ones

I definitely will! I'm wanting to leave them bare aluminum with my billet silver.

ImageUploadedByWAYALIFE1417459999.677657.jpg

My 50" light bar mounts are bare and they blend in pretty nice.

JKJody · Dec 1, 2014

ImageUploadedByWAYALIFE1417465256.562802.jpg

The aluminum ones are incredibly light and worth it. I posted the pic so you can see them raw to get an idea on your billet. I know its a shitty comparison with my anvil but...

ImageUploadedByWAYALIFE1417465441.245069.jpg

ImageUploadedByWAYALIFE1417465475.642588.jpg

utiadam · Dec 1, 2014

JKJody said:
View attachment 113017
The aluminum ones are incredibly light and worth it. I posted the pic so you can see them raw to get an idea on your billet. I know its a shitty comparison with my anvil but...
View attachment 113018 View attachment 113019

Thank you for the pictures! It looks like I'll need to do some sanding but nothing major. Here is what I did to my poison spider mounts:

ImageUploadedByWAYALIFE1417466192.492486.jpg

SFNick · Dec 1, 2014

Wish They had these out when I was shopping around. Looks great!

JKJody · Dec 1, 2014

utiadam said:
Thank you for the pictures! It looks like I'll need to do some sanding but nothing major. Here is what I did to my poison spider mounts:
View attachment 113020

Ok i didnt notice them in your first pic. Looks good.

pedroj14 · Dec 1, 2014

Subscribed! to see more pics and comments on the aluminum corners

JKJody · Dec 1, 2014

utiadam said:
Thank you for the pictures! It looks like I'll need to do some sanding but nothing major. Here is what I did to my poison spider mounts:
View attachment 113020

Clear out your inbox utiadam. It wont let me send anything to you.

utiadam · Dec 1, 2014

JKJody said:
Clear out your inbox utiadam. It wont let me send anything to you.

Done, please try again

utiadam · Dec 3, 2014

These just showed up today

ImageUploadedByWAYALIFE1417636172.361655.jpg

RMC2 · Dec 4, 2014

Nice .

ak49 · Dec 4, 2014

utiadam said:
Well I just placed my order for the aluminum evo corners and the evo mud flap kit from Northridge. I really want to do the ORO Lite DOTs but I'm not sure how much modification is required. I found a picture of it done online but not sure if they are a member here.
View attachment 112975
If not those I would be interested in these lights that I think a few members here have done. I believe JAGS is one.
View attachment 112976

Any info on either one would be appreciated. Also info on required resistors please

The second picture is my jeep. As already stated, they are the Maxxima lights model M85415R

utiadam · Dec 4, 2014

ak49 said:
The second picture is my jeep. As already stated, they are the Maxxima lights model M85415R

Awesome jeep! I have lots of pictures saved of it

I ordered the M85416R I believe.

ak49 · Dec 5, 2014

utiadam said:
Awesome jeep! I have lots of pictures saved of it 

I ordered the M85416R I believe.

I think you'll like them. I have no complaints with them and the price was substantially cheaper than ORO.

Strike Force Zebra · Dec 5, 2014

Adam, I got my lights a few days ago. Thought you might like this idea. There is no real "seal" between the lights and the metal( or aluminum) so I made these.

ImageUploadedByWAYALIFE1417753345.823586.jpg

ImageUploadedByWAYALIFE1417753355.698323.jpg

ImageUploadedByWAYALIFE1417753373.589628.jpg

Strike Force Zebra · Dec 5, 2014

Another thing I likes about them is I don't think much( if any) sheet metal needs done where the other light holes won't line up!!

ImageUploadedByWAYALIFE1417753503.241666.jpg

ImageUploadedByWAYALIFE1417753513.959931.jpg

utiadam · Dec 5, 2014

Aspenkid said:
Adam, I got my lights a few days ago. Thought you might like this idea. There is no real "seal" between the lights and the metal( or aluminum) so I made these. View attachment 113492 View attachment 113493 View attachment 113494

Good idea! Where is the foam from? Do you have pictures of the wiring at all?

Strike Force Zebra · Dec 5, 2014

Michaels..... A hobby store my wife always goes to. I don't have pictures of the wiring. PV explained it pretty good already.

ImageUploadedByWAYALIFE1417753694.976037.jpg

Just placed order for aluminum evo corners

LOSER

LOSER

New member

LOSER

New member

LOSER

New member

New member

Member

New member

LOSER

LOSER

Caught the Bug

Member

LOSER

Member

-

-

LOSER

-