Sway bar angle

MedixJK

-

• Jan 11, 2015

• #1

Lookin for a little insight here. I just put on new adjustable length quick disconnect sway bar links to replace the stock ones, to account for my 2.5" lift kit. Do i just need to adjust them to 2.5" longer than stock? Or is there a certain angle the sway bar should sit at? Tks in advance.

 

MR.Ty

Token East Coast Guy

• Jan 11, 2015

• #2

Your sway bar should be parallel to the ground.

 

cozdude

Guy with a Red 2-Door

• Jan 11, 2015

• #3

MR.Ty said:

Your sway bar should be parallel to the ground.

Click to expand...

Yup it should sit parallel with the frame/ground or if you have a rubi it should sit a little higher than parallel

 

wayoflife

Administrator

Staff member

• Jan 11, 2015

• #4

You want to adjust your links so that your sway bar arms sit at about 5° above horizontal to the ground. Basically, just a bit higher than level especially if you have a Rubicon. That will help prevent your sway bar links from over extending on a full flex.

 

chipper

Member

• Jan 11, 2015

• #5

This is what came with mine

 

MedixJK

-

• Jan 11, 2015

• #6

Good deal. Thanks for the tips. I figured there must be a certain point of reference for that.