PDA

View Full Version : 2016 SEMA BREAKING NEWS: NEW Dynatrac DHD Drag Link Sleeve



wayoflife
10-31-2016, 10:44 PM
Over the last 10 years, Cindy and I have seen our fair share of breaks on the Jeep JK Wrangler and while we've found the factory drag link to hold up well, especially on rigs running a ram assist, where we have seen breaks is on the turnbuckle or adjuster sleeve. Well, Dynatrac now has a solution to this problem. Check out this third of 5 exclusive press releases!

All-New DHD Drag Link Sleeve™ from Dynatrac Provides Extended Adjustment Range and More than Double the Strength for Jeep JKs

http://wayalife.com/photos/_data/i/upload/2016/10/31/20161031164351-3b7eea41-me.jpg

• DHD Drag Link Sleeve™ replaces the factory JK sleeve which is a common failure point in lifted Jeeps with larger tires
• Lengthens the drag link assembly
• Provides more adjustment
• More than doubles the strength
• Made in the USA

Las Vegas – The all-new DHD Drag Link Sleeve™ from Dynatrac replaces the Jeep Wrangler JK adjustment sleeve on the drag link, a weak component that is prone to failure on lifted Jeeps. The DHD Drag Link Sleeve provides more length, more adjustment and is more than twice as strong as the factory sleeve. The DHD Drag Link Sleeve is made in the USA.

The factory drag link adjustment sleeve works well in stock applications. But the additional stress of suspension lifts and larger tires often lead to the failure of this component. Once buckled or fractured, the factory sleeve must be replaced and will immediately disable the vehicle. Additionally, it is common to lengthen the drag link when installing a suspension lift. The thin wall and slotted structure of the stock sleeve becomes even weaker as it is extended, and becomes more prone to buckling and fracture.

The Dynatrac DHD Drag Link Sleeve replaces the stock sleeve on a factory JK drag link, substantially improving overall drag link durability. This provides lifted JKs with a very low cost, stronger drag-link option. The factory drag link is made from high-quality steel and is rigorously tested. Very few aftermarket steering linkage components are US-made or superior to the stock steering linkage.

The DHD Drag Link Sleeve from Dynatrac provides the additional drag-link length often needed to center the axle better under a Jeep Wrangler JK. The extra adjustment of the Dynatrac DHD sleeve allows JK owners to get the maximum travel out of the factory steering gear to achieve optimum maneuverability in tight off road obstacles, as well as everyday parking situations. The DHD sleeve is machined from billet 4130 heat-treated chromoly steel, and it is precision threaded to mate with the stock drag link components. It comes complete with heavy-duty clamps to form a single, rigid drag-link assembly ready to handle those hard rock obstacles.

WJCO
10-31-2016, 11:08 PM
Great idea.

Shadow's_Jeep
10-31-2016, 11:12 PM
I think I found my next MOD !!!

Sent from my SM-G930V using WAYALIFE mobile app (http://r.tapatalk.com/byo?rid=73415)

cozdude
10-31-2016, 11:25 PM
Def interested to see more!


Sent from my iPhone using WAYALIFE mobile app (http://r.tapatalk.com/byo?rid=73415)

HeyitsRay
10-31-2016, 11:57 PM
Need this!


Sent from my iPhone using WAYALIFE mobile app (http://r.tapatalk.com/byo?rid=73415)

jesse3638
10-31-2016, 11:59 PM
Dynattenuator?..;)

jkbarnett
11-01-2016, 12:20 AM
Looks good


Sent from my iPhone using WAYALIFE mobile app (http://r.tapatalk.com/byo?rid=73415)

CarolinaJK
11-01-2016, 12:47 AM
Very interested in this!


Sent from my iPhone using WAYALIFE mobile app (http://r.tapatalk.com/byo?rid=73415)

JAGS
11-01-2016, 12:57 AM
If my math is correct, we've got two more Dynatrac announcements. [emoji41]

MTG
11-01-2016, 01:11 AM
If my math is correct, we've got two more Dynatrac announcements. [emoji41]

Check your math. :yup:

Strike Force Zebra
11-01-2016, 01:15 AM
Very cool!!!


Sent from my iPhone using WAYALIFE mobile app (http://r.tapatalk.com/byo?rid=73415)

OJK12
11-01-2016, 01:49 AM
This is pretty cool!


Sent from my iPhone using WAYALIFE mobile app (http://r.tapatalk.com/byo?rid=73415)

rampagejk
11-01-2016, 01:51 AM
Do you have picture of jeep that has All-New DHD Drag Link Sleeve™ from Dynatrac Provides Extended Adjustment Range ?

Tylersilverjku
11-01-2016, 02:06 AM
I have this really odd feeling all my steering components are about to be replaced with dynatrac [emoji848][emoji848]


Sent from my iPhone using WAYALIFE mobile app (http://r.tapatalk.com/byo?rid=73415)

JAGS
11-01-2016, 03:44 AM
Check your math. :yup:

I counted 10 threads. Take the square root and then do some common core shit. [emoji23][emoji23][emoji23]

I saw three threads and Eddie noted 5 press releases? Maybe I missed something. [emoji12]

Overland_stormtrooper
11-01-2016, 09:24 AM
This will be added to my list of things i want

Sent from my SAMSUNG-SM-G891A using WAYALIFE mobile app (http://r.tapatalk.com/byo?rid=73415)

JeepDrum
11-01-2016, 03:24 PM
They broke the OEM adjuster out in Moab right? It's nice to see more companies advancing because of necessity, and not because they want to sell things that people "think" they need.

bonedaddy
11-01-2016, 04:53 PM
Small piece of mind for sure!


Sent from my iPhone using WAYALIFE mobile app (http://r.tapatalk.com/byo?rid=73415)

jkruiser
11-01-2016, 10:47 PM
Definitely on the list!


Sent from my iPhone using WAYALIFE mobile app (http://r.tapatalk.com/byo?rid=73415)

BitBucket
11-01-2016, 11:03 PM
Need one of these, any idea of when they will be available?

wayoflife
11-02-2016, 07:40 PM
Here are a couple of shots of what this sleeve looks like. What I wish you could see is just how heavy it is as well.

http://wayalife.com/photos/_data/i/upload/2016/11/01/20161101231041-956003e2-me.jpg

http://wayalife.com/photos/_data/i/upload/2016/11/01/20161101231042-9ff2df6c-me.jpg

cozdude
12-06-2016, 07:03 PM
yea I will pass for $200 at that price mine as well get the full Currie correct link system which I'm sure has its own DL sleeve
233531

RubiconJohn
03-18-2017, 02:18 AM
Just pulled mine out of the box, it's a beast compared to the oem, 5 9/16 vs 7 1/8.

Wall thickness is almost double the thickness.