billybob990
New member
Ok 1st i have 35" tires and i dont have full turning radius i will be putting on a 3.25" lift in a couple of weeks and i still dont think i can clear the control arms so my question is does wheel spacers take away from my strength factor and is there a limit i should go i was wanting 1.5" spacers. 2nd question i took the jeep out to the mud today and when checking my drivetrain afterward i noticed my transfer case had a little play i could move it side to side not much just a little and my friend said that its supposed to have a little play like that.3rd i looked at a chart for gears and it says to run 4:56 gears with 35's to get close to stock settings, will that still give me the power i need to power out of a hole or climb a hill? and last my jeep has a 3" body lift and i cant get it into
4w low, the alignment bracket that keeps the transfer case shifter in the right place is in the way, does it hurt to cut some of that bracket out? by the way its a 97 tj, thanks
4w low, the alignment bracket that keeps the transfer case shifter in the right place is in the way, does it hurt to cut some of that bracket out? by the way its a 97 tj, thanks