Recent content by Manvan

So I have 47k on my shocks and I think there done. 3" lift w/35's. Mostly DD. I have about $100 each to spend and have been looking at Bilstein 5100's or Fox evolution 2.0's. Which should I pick?

A friend has a 2014 jkur with a 3-1/2" rock crawler suspension, fox shocks on 37's all professionally installed by 4 wheel parts. He also only has 3000 mi on the jeep. He is complaining that his jeep doesn't feel stable at highway speeds on a washboard surface. Also want to mention that this...

So everything decided to craps at once but here's what I need help with. My rear diff. started to sling grease out the pinion seal. So when I started taking it apart, I removed the drive shaft and noticed the pinion moved around a lot as if the nut came loose. Problem is, the nut wasn't loose...

So this past weekend I managed to blow up my drivers side axle shaft. After looking at my options, I came across a replacement axle made by Dana. The specs say rolled splines, alloy construction, and larger 1350 life u-joints. They make them for the D30 and the D44. Also, the driver was $219 and...

Could someone same me a lot of time and post what u- joint fits the front drive-shaft. Thanks Sent from my HTC6500LVW using WAYALIFE mobile app

Can someone explain what it means when antennas are advertised as 1/4 wave or 5/8 wave. Also antennas listed as 500 watts or 1000 watts or 2000 watts. Lastly, stuff like base coils and top loaded. Thanks Sent from my HTC6500LVW using WAYALIFE mobile app

My son-in-law has the competition exhaust that exits in front of the axle. Basically sounds like bee's on steroids. Has a lower pitch than stock but the sound comes right up through the floor. Sent from my HTC6500LVW using WAYALIFE mobile app

Started with a used xrc bumper. Cleaned it up and sprayed it with Upol to match my grill. Then I mounted a Smittybilt 9.5 xrc winch. Also used the AEV plate mount. Also mounted a pair of Rigged daullies . Sent from my HTC6500LVW using WAYALIFE mobile app

This winter in the midwest really took its toll on the roads and the pot holes did the same to my suspension. So last fall I had installed a front track bar relocation bracket from Rough Country ($35) but never got around to flipping my drag link. My stock drag link lasted 38K so I figured what...

I live in the midwest with rain and snow. Could someone with a front Dana 30 with a truetrac front locker tell me what to expect with this set up and moderate wheeling. I would like the benefit of having a front locker but want to keep it simple($). Thanks P.S. 3" lift, 35's stock gears and an...