PSC -8 AN Steering Pressure Hose

Here you go bro. High pressure line I routed from the pump on top of the round cross member in between the lower radiator hose and the fan. Secured it with some clamps screwed into the top of it to reduce movement. Then routed kinda under/behind the coolant reservoir and around to the top of the box

IMG_3163.jpg

IMG_3164.jpg

IMG_3165.jpg

IMG_3167.jpg

The low pressure line goes from the box routed to the front side of the radiator support where I mounted the cooler to the underside and then around the passenger side of the support up to the PSC reservoir.

IMG_3162.jpg

IMG_3160.jpg

IMG_3168.jpg

Hope that helps... I know there's a lot of shit going on under there.
 
Jeff, I was reading your installation guide and it looks like you use brass push lock fittings. Any change you can do a "race" quality hose configuration or provide a BOM, so I can source my own hose and race fittings? Also want to know if there is any value in upgrading to a larger diameter ram when I order the kit?
 
Top Bottom